What problems do you have when installing a fixture?

Led explosion-proof lights bring us soft and efficient light effects in the process of use, so they are more environmentally friendly; energy-saving effects prominently save more capital for the unit; safety and reliability reduce more accidents, so we have to Want to ensure the performance of these high-performance, pay attention to the installation of led explosion-proof light is very important, he can not only improve the work efficiency, but also can effectively improve the service life, how to do it?

First, when installing the LED explosion-proof light, we must adhere to the principles of safe installation, firm installation, and standard installation. When installing, we must strictly follow the installation instructions in the manual, especially the special emphasis on the attention link. It should be highly valued and it is important to guard against negligent accidents or affecting the quality of the installation.

Second, we must seriously look at the installation of explosion-proof lights explosion-proof type, type, level, group, shell explosion-proof grade, etc., these are our effective basis for the installation of led explosion-proof lights, and we have to install certain time It is necessary to cut off the power supply first, and then strictly follow the installation requirements of the manual. It is necessary to tighten the screws. Otherwise, if a large shock is encountered, it may be very dangerous.

Third, if we can not properly operate it may wish to choose to hire a professional installation master to carry out, so that better guarantee the installation quality, so as to better play the effect of led explosion-proof lamp, prolong life.

The correct operation can enhance the performance and life of the LED explosion-proof lamp. At the same time, if the regular and reasonable LED explosion-proof lamp installation can also better protect the new energy and life of the LED explosion-proof lamp, we must ensure the quality of the installation.

Technical Parameters:

Shape color: ocean king yellow gray forest color

Light source type: Cree CREE brand

Lamp beads number: 60

Explosion-proof mark: Exdemb II CT6

Operating voltage: AC/DC 220V±20% 50Hz

Rated power: 20/30/40/50/60/70/80/100/120/150W

Light source color temperature: warm white 2700~4500K/normal white 5000~6500K

Power factor: 0.98

Power lumens: 8400~12600lm

Protection class: IP65

Anti-corrosion level: WF2

Introduction device: G3/4" inlet specification, suitable Φ 8mm～Φ12mm cable

Installation method: ceiling type, wall type, embedded type, street lamp type

Product weight: 8kg

Overall size: 320×310mm

Packing size: one loaded 410*410*330mm

Features:

1. Light source module: Uses Cree 3535 high-brightness LED light source, with high-efficiency constant-current drive power supply, saves 60% compared to gas discharge lamps; LED components are all sealed, waterproof and dustproof, no internal cleaning and maintenance; circuit board heat Low resistance, specially designed module circuits, each unit failure will not affect the normal operation of the remaining components. Its temperature is 10 degrees lower than other brands.

2. Power Module: High-efficiency constant-current driving power supply with intelligent power adjustment period; With luminous flux compensation function, reducing light failure, ensuring the efficacy of LED light source; Overvoltage protection, lightning protection, surge protection, over-current Protection and surge current protection.

3, cooling module: explosion-proof lamp shell using aluminum alloy high-pressure casting molding, the surface after high-pressure electrostatic spray shot blasting, effectively providing the thermal performance of the shell; aluminum substrate close to the aluminum alloy shell, can instantly convert point heat source As a surface heat source, the heat dissipation area is increased exponentially, which facilitates the rapid dispersion of heat and improves the efficiency of heat dissipation; the surface of the housing has diverging and dispersing grooves to remove heat by means of air flow; the heat sink has a high density and provides a heat dissipation area, which fully ensures the heat dissipation of the LED. Requirements, longer life.

4. Light distribution module: The light distribution element specially designed for each type of lamp can give full play to the use performance of the lamp; Without UV radiation, it can provide high quality lighting and health protection for users who work in the room for a long time; Wall installation rotation angle Adjustable, cable routing, ceiling mount, flush mount, cable or steel cable routing.