As people's daily life areas gradually increase, more and more places need explosion-proof lights, and even install one in their own warehouse. Because it can not only play a role in lighting, but also a security guarantee. However, compared with other lamps, there are more requirements for the installation of explosion-proof lamps and precautions. Most people do not know how to install explosion-proof lights. Let's talk about it for everyone.
Explosion-proof lights are mainly used in dangerous places where flammable gas and flammable dust are present, such as oil refining, petroleum storage, medicine, printing and dyeing, and military industries. Because of arcs, sparks, and high temperatures generated inside the lamp, the flammable gas and combustible dust in the surrounding environment can be ignited, further solving the problem of explosion-proof requirements. Explosion-proof lamp installation and maintenance of the following points.
1, only need to open the shell and the buckle, and then open the lamp cover, you can connect the line.
2. When introducing the sealing ring of the device, it is necessary to ensure its reliable crushing performance and to clamp the cable.
3, the use of blocking plate and compression nut to reliably seal the unnecessary inlet on the luminaire, so that its explosion-proof and protection grade performance to ensure intact.
4. Before the lamp is put into use, it must be firmly grounded inside and outside and the access of the user's on-site grounding system.
5, when doing fixture installation and maintenance, remember not to live open.
6, to regularly carry out inspection of the sealing surface, if the re-examination found that the phenomenon of aging, should replace the lamps in a timely manner.
7. The explosion-proof lights just left the factory are almost empty, and they need to be fully charged before they can be used normally.
Door Latch For Gm,Door Latch,Door Lock Actuator,Front Left Power Door Latch Actuator
RUIAN GLEEFUL AUTO PARTS CO., LTD. , https://www.rpc-gleeful.com