Automatic Chinese medicine pill machine automatic Chinese medicine pill machine brings together all kinds of automatic Chinese medicine pill machine advantages in one machine, automatic Chinese medicine pill machine has a round shape, the dose is accurate, the disintegration is fast, the delivery is smooth, no shed The material, the transmission is stable, the operation is easy, the failure rate is extremely low, etc. The automatic pill machine can make honey pill, water pill, water pill, concentrated pill, paste pill, wax pill, etc. The automatic pill machine conforms to GMP standard. The automatic pill making machine is an ideal pill making machine for pharmaceutical factories, health food factories and hospital preparation rooms, clinics and pharmacies.
Structural features:
1. This machine is composed of two parts: striping and pelletizing. The box structure is horizontally stripped, the structure is simple, the operation is easy, and the maintenance is convenient.
2. The worm wheel reducer is used for the delivery, and the transmission is stable and reliable.
3. The shot peening and cutting mechanism of the pelleting part are installed in a gearbox. The lubrication condition of the machine is good. The cutting speed can be adjusted by the knob of the stepless speed changer, so that the hob can obtain 6-30 rpm. Until the cutting speed reaches the matching speed.
4. The feeding port is large, the pressing plate is turned to press the material, which is convenient for packing, and can prevent the phenomenon of shed material. The hopper is bounded by the flap axis, which is divided into two upper and lower parts. It is very convenient to disassemble when cleaning.
5, electric heating using electric heating tube, safe and reliable, and smooth.
6. Use alcohol to drip the strips. The outside of the pelletizing knife is equipped with a brush to prevent sticking. The alcohol is packed in the square box of the delivery mechanism, and the amount of alcohol is adjusted by the ball valve.
Instructions:
1. This machine is suitable for indoor temperature -5 °C to +40 °C, relative temperature less than 90%, grid voltage amplitude fluctuation <10% rated value, no conductive dust and corrosive metal gas indoors. Installed in a sunny and clean factory, you can use the feet and level. Be sure to ground the cable for safety.
2. Before driving, you must check whether the oil level of the gearbox reaches the standard position, check whether the oil cup on the hopper is filled with cooking oil, check whether the pelletizing knife is aligned and tightened, whether the alcohol system is unblocked, and adjust the appropriate amount. The guide wheel, the guide frame, the pelletizing knife, etc. are disinfected, and the electric heating is turned on.
3, the strip part is 3-5 minutes of empty operation, no abnormality can be fed, push out the strip, return to the hopper part, and then open the pellet part after the material is qualified, the feeding should be uniform during the operation, if the strip is found and the pellet is found When it is not synchronized, it can be adjusted by the knob. The clockwise pellet is fast, and the counterclockwise pellet is slow. The size of the pellet diameter can be achieved by changing the different outlets and the pelletizing knife and the guide wheel.
4. Do not put foreign matter into the hopper during feeding. Do not put your hand into the upper plane of the hopper to prevent the pressure plate from crushing the hand. Always check the parts of the machine for any abnormalities and find that the abnormality stops immediately.
5. After use, turn off the main switch and other switches after power off. When cleaning, first remove the strip outlet and the electric heating cover. When unloading the machine head, use a hook-shaped handle (dedicated), and then pull out the bracket and the propeller. Disassemble the upper part of the hopper to clean the two flap shafts, apply the oil after washing, and then use alcohol to degrease each part.
6. The oil in the reducer should be kept above the oil mark. The oil should be drained for two to five months after normal operation. Replace the new oil. The oil cup on the hopper should be added with oil three times per shift. Other open gear sprocket points Add the right amount of oil.
Tool and accessories removal and installation:
1. After the special retracting nut and the knife are tightened, the pill knife can be retracted from the top wire of the knife nut to retreat the pill.
2, spring removal method and orientation
Remove the pelletizer and use the mover to clamp the knife shaft. The front thread on the right side of the cutter shaft is right-handed on the right side, and the left side is left-hand thread. After removing the bolt on the flange of the cutter shaft, unscrew the cutter shaft, and then pull the cutter shaft forward to draw the flange seat, the gear body cutter shaft and the spring once, remove the flange seat, and the gear body can Replace the spring (left-handed spring on the left and right-handed spring on the right).
3. Guide key removal method and orientation
After removing the flange seat, the compression spring will pulsate the gear body forward by 10mm, and take out the guide key. Do not exit with the gear body to avoid the guide key being caught in the undercut of the square groove of the cutter shaft.
EDTA Chelants & Phosphonate Sequestrants
Kylin Chemicals manufactures and markets high quality chelants and sequestrants, including EDTA, Tetrasodium EDTA,EDTA Disodium salts, EDTA Tetrasodium salt, HEDP, PBTC, ATMP and DETPMP, etc.
Our sequestrants are widely used in variety of applications like detergents & cleaners, cosmetics, industrial water treatment, oilfield water treatment, textile dyeing, etc.
Edta Chelation,Phosphonate Sequestrants,Ethylenediaminetetraacetic Acid,Phosphino Polycarboxylic Acid
Kylin Chemicals Co., Ltd. , https://www.kylin-chemicals.com