Part Name | Material selection | Service life ( month ) | Minimum spare amount per mill | |
Liner | Cylinder liner End cap liner Inlet and discharge ends Grid plate | High Manganese Steel High manganese steel Iron and steel Manganese steel | 6 to 12 8 to 10 24 to 36 6 to 8 | 2 sets 2 sets 1 set 2 sets |
Feeder spoon head Feeder body shell Main bearing lining Drive bearing bushing gear Ring gear Liner bolt | High manganese steel Carbon steel or cast iron Pap alloy Babbitt alloy alloy steel Cast steel Carbon steel | 2 48 48 to 60 18 6 to 12 48 to 96 6 to 8 | 2 1 1 set 2 sets 1 1 0.5 sets |
A heat exchanger is a system used to transfer heat between two or more fluids. Heat exchangers are used in both cooling and heating processes.The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant
Heat Exchangers,Industrial Heat Exchangers,Steel Coil Heat Exchanger,Heat Exchanger Packaged Equipment
Jiangsu Juding Environmental Protection and Energy-saving Equipment Manufacturing Co. , Ltd. , https://www.filter-plant.com