The central authorities made heavy fists to increase the speed of development of LED lighting

The semiconductor LED lighting product application demonstration project jointly initiated and organized by the National Development and Reform Commission, the Ministry of Housing and Urban-Rural Development, and the Ministry of Transport was formally launched and officially announced the 28 successful bidders. Bidding is a signal. It is a crucial step for LED companies. The country will surely have a second-step combination punch. The launch of the demonstration project is an active performance of the third round of LED policies of the Chinese government.

In order to promote the localization, maturation and industrialization of LED semiconductor technology, following the development trend of LED applications in the world, as early as 2009, the Chinese government launched the “Ten City Wanhao” semiconductor lighting application demonstration city plan by the Chinese Ministry of Science and Technology. It is the Chinese government’s first-round large-scale policy support for LED at the central level.

The second round of policy was born in April 2010. The four ministries and commissions of the Reform Commission, the Ministry of Finance, the People's Bank of China, and the State Administration of Taxation jointly issued the "Opinions on Accelerating the Implementation of Contract Energy Management and Promoting the Development of Energy-Saving Service Industry" - the so-called contract energy. Management EMC. The suggestion is that by 2015, a relatively complete energy-saving service system will be established, making contract energy management one of the main ways for energy-using units to implement energy-saving reforms.

The commencement of the central macro-economic policy again and again has injected great vitality and traction into the development of China's LED industry, and has also guided and planned the LED industry in China for a period of time. Although the first two rounds of policies revealed many defects in the implementation process, the achievements have been obvious to all, and they have played a positive role in promoting technological innovation and industrial development.

Inspired by the first two rounds of national favorable policies, many companies began to re-examine and value the development potential of the LED industry, and set off a wave of "LED fever" in the mainland. China's elimination of incandescent lamps with energy-saving lamps is not enough, but also need a new light source, LED light source will serve this history, energy-saving lamps recognized as energy-saving but not environmentally friendly, regardless of the views of the LED, it is a new green energy-saving light source, there is a strong life.

As incandescent lamps gradually come out of history and government subsidies and other factors to promote, LED lighting gradually from the past niche applications, such as display cabinet lights, plant lighting, medical lamps, began to enter the commercial, home main lighting market, mainly including home Lighting, street lighting, outdoor lighting, tunnel lighting, commercial lighting, etc., LED lighting products cover almost all of the traditional lighting applications. Companies involved in the LED lighting industry are blooming everywhere in China, especially in the Pearl River Delta region. Recently, there has been a gradual increase in the proportion of northern corporate groups. In addition, some emerging lighting companies showed strong interest and investment willingness. For example, BYD, which has become popular in the automotive industry, has invested heavily in LED lighting, and has extended its industrial chain to epitaxial growth, chip packaging, and lighting product applications. LED lighting industry is evident in the hot.

Of course, the country's macroeconomic policy is not the only factor that promotes the good development of the LED lighting industry. LED chip technology is still a problem that needs to be considered by various business enterprises. Currently, LED lighting in the upper reaches of the LED industry accounts for about 2 to 30% of the total revenue. By the end of 2009, China's 62 LED chip companies had applied for only 30,000 patents, which was less than 10% of the total global LED field patents. Twenty companies in Europe, America and Japan have applied for more than 300,000 patents, accounting for 85%-90% of the total global LED patents. Such research and development capabilities are clearly lacking in core competitiveness in the face of international LED giants. However, the state has a high subsidy for the purchase of professional equipment for chip manufacturing, as well as the huge space for development in the chip technology of the domestic LED lighting industry and a relatively weak competitive situation, but also for major companies to invest in investment to build chip production line Confidence.

LED lighting companies in mainland China will only make full use of the favourable conditions of large-environment-friendly policies, such as springs, actively accelerating the accumulation of core LED technology capabilities of enterprises, making double-action moves, rationally adjusting strategic resources, keeping abreast of the pulse of the market, and striving for rational balance of investment in all aspects. In order to fully grasp the development trend and direction of the industry, and properly conduct its own positioning, it will surely stand up to the chest of "LED healthy low-carbon lighting leaders."

The Vacuum Oven is an oven that uses two-sided heat radiation.


1. Inner box material: The inner box adopts SUS stainless steel with high temperature and corrosion resistance on the international market at present, and the thickness of the steel plate is 3mm, so that your product can be processed in a clean working environment without being affected by the unclean environment.
2. Material of outer box: The outer box adopts the 1.5mmSECC steel plate commonly used in the international equipment industry. The outer surface of the steel plate adopts a precise double-layer powder paint treatment. Compared with the usual exterior coating process, the appearance is more beautiful and enhances its anti-corrosion protection. Rust performance.
3.Insulation Material: Our thermal insulation material is made of imported stone insulation wool with strong thermal insulation performance, which has more thermal insulation performance than ordinary insulation cotton. It has very good effect for your energy saving and reducing the impact on the ambient temperature of the equipment. Good performance.

1. The heat-generating material is a heat-resistant heat pipe;
2, the temperature setting range: RT +10 °C ~ 250 °C, free to set the temperature you want;
3, programmable thermostat: free to adjust the heating time to reach the desired temperature;




Temperature control system
Using PID microcomputer automatic temperature control system, sensing the temperature of the box studio through the sensitive detection control head, feedback to the microcomputer, through the microcomputer's automatic and rapid program operation, quickly and automatically adjust the output power of the output to achieve precise control At the precise value set.




Temperature control system
The adopted PID microcomputer automatic temperature controller can alarm and stop the power output of the machine studio by setting the internal upper and lower temperature limits so as to protect the products in the machine table from unnecessary overheating. Loss.
1. Over-temperature protection system: The machine is equipped with an over-temperature protection system at the power supply input of the whole machine and automatically blows the fuse system when the power is too high.
2. High temperature protection system: When the temperature is out of control due to external force, the system will automatically stop the power supply of the whole machine when the temperature exceeds the set temperature of 10 degrees, thereby protecting the safety of your products and machines.
3. Over-current protection system: When the power of the whole machine exceeds the normal power due to excessive applied voltage or other reasons, the system will automatically power off and protect the industrial control components of the whole machine from being damaged.

Vacuum Oven

Vacuum Oven,Industry Vacuum Oven,Led Display Oven,Electronic Heat Dry Age Cabinet

Dongguan Jaten Instrument Co.,LTD(HK TT:Jaten Technology Co.,Ltd ​) , http://www.jatentech.com

This entry was posted in on