I. Introduction:
The cable fault tester manufacturer host is another masterpiece of the company. The technology has reached the international advanced level, breaking the monopoly of foreign companies in this field. The host adopts the highest international technology, and all high impedance fault waveforms are presented as simple low-voltage pulses. Waveform, easy to determine the distance to fault.
The cable fault tester manufacturers are used to detect high resistance leakage faults, flashover faults, low resistance grounding, and open circuit faults for various power cables.
Second, function and characteristic:
1. It can measure the high and low resistance faults of all cables below 35KV, and can adapt to a wide range of applications.
2. With user-friendly software and full Chinese menu. The key definition is simple and straightforward. The measurement method is simple and fast.
3. Detection of failure success rate, test accuracy and ease of testing better than any domestic testing equipment.
4 large touch LCD screen as a display terminal, the instrument has a powerful data processing capabilities and a friendly display interface.
5. With extremely safe sampling high voltage protection measures. Test equipment will not crash and damage in high-impact environment
6. No test blind spot.
7. Built-in power supply can test the open circuit and low resistance short circuit fault of the cable in no power supply environment.
Third, the main performance indicators:
1. Test methods: low pressure pulse, high pressure flashover, speed measurement.
2. Impact high pressure: less than 35KV power cable.
3. Data sampling rate: 80 MHz, 40 MHz, 20 MHz, 10 MHz.
4. Test distance: >30Km.
5. Reading resolution: 1m.
6. System test accuracy: less than 50cm.
7. The test cable pulse width is provided with "0.05", "0.1", "0.2", "0.5", "1", "2", and "8" microseconds.
8. With test waveform storage function: The waveforms that are tested in the field can be conveniently stored in the instrument in the specified order for observation at any time. A large number of field test waveforms can be stored.
9. The measured fault point waveform and the good-looking full-length open waveform can be simultaneously displayed on the screen to compare with the screen and superimpose and compare, and the fault distance can be automatically determined.
10. Built-in power supply: The instrument can work continuously for more than 3 hours after full charge, and it can also work with external AC power supply.
11. Working conditions: Temperature -10 °C ~ +45 °C, relative humidity 90%.
Pallet Fork
Typically any forklift from 1500-5500 lbs. will have Class 2 forks. 6000-11,000 lbs capacity lifts will be Class 3. 11,500-17,500 lbs capacity forklifts will be Class 4. After that, most forklifts use a shaft mount or propriety mount.
4000-Pound Capacity Clamp-on Pallet Forks for Tractor/Loader, Skid Steer Bucket | Pair. Attachments
The pallet fork is a component of the lever escapement of a mechanical watch. The pallet forkand the lever form one component that sits between the escape wheel and the balance wheel.
Pallet Forks For Tractors. Moving pallets with your tractor is a task that makes sense for millions of tractor owners,
contact Sara- Genenal manager
email:forkliftfork@hotmail.com
phone/whatsapp/wechat:8613863419726
Pallet Fork,Shaft Forks,Cargo Fork,20 Ton Forklift Forks
Shandong Techence Forging Co.,Ltd , https://www.shandongtechence.com