Shaft wellbore section design includes: internal lifting container type (bucket or cage), combined equipment type (slot beam and rigid tank or flexible tank), size between ladders, number and size of cables, permanent well of shaft Type and thickness of the guard (well wall). The design must have the following original information:
( 1 ) Engineering geological and hydrogeological data of the rock formation passing through the wellbore;
( 2 ) the position of the parallel tube, the orientation of the lifting center line, the level of the rail surface at the level of the wellhead and the downhole, the direction of loading and unloading or the direction of loading and unloading;
( 3 ) the use of the combined cylinder, the age of use, the depth of the wellbore and the requirements for the extension of the joint;
( 4 ) Lifting methods and lifting equipment;
( 5 ) The number of specifications, materials, specifications, various pipelines, cables, etc. of the ladders to be arranged in the wellbore;
( 6 ) The layout of buildings and structures on the ground of the wellhead;
( 7 ) The maximum amount of air passing through the wellbore;
( 8 ) Local material supply, etc.
( 1 ) Engineering geological and hydrogeological data of the rock formation passing through the wellbore;
( 2 ) the position of the parallel tube, the orientation of the lifting center line, the level of the rail surface at the level of the wellhead and the downhole, the direction of loading and unloading or the direction of loading and unloading;
( 3 ) the use of the combined cylinder, the age of use, the depth of the wellbore and the requirements for the extension of the joint;
( 4 ) Lifting methods and lifting equipment;
( 5 ) The number of specifications, materials, specifications, various pipelines, cables, etc. of the ladders to be arranged in the wellbore;
( 6 ) The layout of buildings and structures on the ground of the wellhead;
( 7 ) The maximum amount of air passing through the wellbore;
( 8 ) Local material supply, etc.
The machine can feed powder or granule into twin cone container through vacuum transmission or manual, With continuous rotation of container, material will make complex impacting motion in the container and reachto uniform mixing. The machine adopt outer-inner rotation and grain of powder is uniform. Its mixing barrel can be tilted freely at the angle of degrees for discharging and cleaning purpose. Energy saving, easy to operate, low labor strengh, high work efficiency.
Double Cone Mixer,Two-Dimension Mixer,Crushing Machine
Changzhou Jiafa Granulating Drying Equipment Co.,Ltd , http://www.jf-drying.com