Concentrator's concentrate management system

1. Purpose

In order to strengthen beneficiation plant lead, zinc, sulfur concentrate product management, this system prevents metal natural wear and tear, according to the characteristics of various concentrate formulated.

2. area

This system is suitable for the daily management and shipping management of lead concentrate, zinc concentrate and sulfur concentrate in the concentrator.

3.1. Management of lead and zinc concentrates

3.1.1. The concentrate manager is responsible for the specific management of lead-zinc concentrate. Its responsibilities are:

3.1.1.1 Responsible for cleaning and cleaning the cargo field every day to ensure that the goods yard is clean, tidy and free of debris.

3.1.1.2. Responsible for the inspection of the entry and exit of vehicles on the freight yard. Except for the delivery of vehicles, no other motor vehicles may be parked in the concentrate yard.

3.1.1.3. Responsible for cleaning and inspecting the tires of vehicles entering and leaving the cargo yard to prevent mechanical debris from entering the product and affecting its quality. At the same time, it checks whether the tires adhere to the concentrate metal and is responsible for cleaning.

3.1.4.4 Responsible for supervising the loader After cleaning the concentrate, clean the remaining concentrate and tire adhesions in the bucket as required to avoid the loss of metal.

3.1.1.5 Responsible for the daily maintenance and management of lead and zinc concentrates, and evenly sprinkle water according to climate change, so as to avoid the concentrate being too dry and being blown away by the wind to cause partial metal loss.

3.2. Management of the sulfur concentrate pool

3.2.1. The sulfur concentrate reservoir is under the management of the fine tail workshop. In order to ensure the safe operation of the concentrate reservoir, the shift monitor should supervise the administrator to do all the inspections and record as required.

3.2.2. The use and delivery time of the sulfur concentrate pool should be accurately recorded, and the output should be counted according to the deadline.

3.2.3, daily management notes for sulfur concentrate:

a. Observe whether there is leakage in the exit;

b. Check whether the area around the reservoir area is solid;

c. Check whether the flood control channel is unblocked;

d. Check whether the emissions are super high;

e. Check if the water capacity of the reservoir is too much, and whether the water is blocked or not.

3.2.4 When the above factors are present in the sulfur concentrate reservoir, it is necessary to report to the workshop in time and supervise the treatment to avoid potential hazards.

3.2.5 During the flood season, it is necessary to increase vigilance, strengthen vigilance, and often check the relevant weather forecast to ensure that it is prepared.

3.2.6 After the sulfur concentrate has been discharged from the warehouse, it is necessary to supervise the outbound storage unit to block the exit, to ensure that its thickness is suitable, and there is no looseness.

3.2.7. When the sulfur concentrate is piled up in the freight yard, it is necessary to pay close attention to the phenomenon of high temperature ignition, and extinguish the fire in time to avoid the expansion of the fire range.

3.2.8. Make all running records according to regulations.

3.3. Outbound management of concentrates

3.3.1 When the concentrate is sold out of the warehouse, the sales department shall notify the concentrator one day in advance to prepare for the work.

3.3.2. When the lead-zinc concentrate is sold, the concentrating plant arranges the personnel to uniformly sample, and the three parties involved in the production, purchase and sales participate in the production and distribution of the sample.

3.3.3. When the sulfur concentrate is sold, after the tare weight has passed the tare weight, the sales department will issue a loading notice, and the sulphur concentrate manager will arrange the loading according to the notice, and the afternoon will be the same after the end of the check. Report to the mine for future reference.

3.3.4. After the loading of the concentrate vehicle is completed, the registration procedure must be performed in the guard room, and then the metering room is measured. The sales department issues the bill, and the south gate security room checks and releases with the exit certificate. If the formalities are incomplete, the guard can Directly seize the vehicle.

3.3.5. After the delivery of the same day, the sales department, the guard room, the weighbridge room and the concentrating plant check the bills to ensure that the number of trucks is correct and accurate.

3.3.6 When the sulfur concentrate is shipped out of the warehouse, it is necessary to pay attention to the surrounding environment sanitation. After the shipment of a batch of goods, it is necessary to clean up the spilled concentrate in time, and cover the sand to keep it clean.

3.3.7. After the shipment of lead and zinc concentrates is finished, it is necessary to clean up the scattered metal and freight yards in time to keep the yard clean and tidy.

Jackets & Coats

Coat & Princess Dress, Coat & Printed Princess Dress, Coat and Girl Dress,Coat & Printed Skirt Princess Dress

XUANZI GARMENT CO.,LTD. , https://www.xzgirldress.com

This entry was posted in on