Rice is a common economic crop that grows in open fields. Temperature, water, light, and gas all have an impact on the growth of rice. In the past, people started paddy rice cultivation, and they were most concerned about water, fertilizer, etc. Now, with agriculture, The development of modernization, intelligent agricultural environmental monitoring instruments, etc. began to be applied in large scale to agricultural production. This instrument provides an important basis for exploring the influence of temperature, water, light and gas on rice, and also for the development of rice. Scientific cultivation provides a viable route. For example, the use of intelligent agricultural environmental monitoring instrument to determine the appropriate rice planting period.
Rice has its optimum temperature, moisture, light and other requirements at all stages of its growth, but only if it seizes the best time for planting, then the survival rate of rice will be higher and the growth will be better. There will also be a significant increase in production. Through the monitoring and research of intelligent agricultural environmental monitoring instrument, it was found that rice early indica was sown at temperatures above 10°C (plastic film seedlings growing at around 8°C), planted above 15°C, and planted above 12°C, 17°C. Above planting is appropriate. At the same time, in order to ensure that the rice bloom during the flowering period of the panicle does not meet the low temperature hazard, an intelligent agricultural environmental monitoring instrument should also be used to strengthen the temperature detection in the field, because the daily average temperature of the japonica rice is required to be stable at 20°C, and there is no continuous more than 3 days. Below 20 °C low temperature, indica rice (including hybrid rice) requires more than 22-23 °C, no low temperature below 22-23 °C for 2-3 consecutive days.
In short, the use of intelligent agricultural environmental monitoring instrument to enable the entire growth process of rice to avoid adverse weather environment, is always in the light, temperature, water more appropriate environment, for the safe growth of rice is a very significant effect, especially With the continuous expansion of modern agricultural production scale, the importance of using intelligent agricultural environmental monitoring instruments to strengthen agricultural environmental monitoring has become increasingly prominent. This has not only effectively increased the level of disaster prevention and control of modern agriculture, but also ensured the safe production of food. It also effectively promoted the refinement of modern agriculture and reflected the important value of science and technology in agricultural production.
uPVC profile cutting machine is major and essential equipment for manufacturing uPVC windows and doors. Cutting is the beginning of making uPVC windows, and one of most important manufacturing procedures in the whole window manufacturing process. The cutting accuracy (such as accuracy error of cutting length, accuracy error of cutting angle) will affect the welding accuracy and welding strength of uPVC windows, and then affect the size accuracy and angle accuracy of finished uPVC windows. STONE window machinery guarantees the cutting quality of the uPVC profile cutting machine through use of high quality hard-alloy saw blades, high accuracy liner bearing motional pairs and headstock, and other high quality machine components, and through our strict quality control system. uPVC profile cutting machines mainly includes double mitre saw, V-notch saw , glazing bead saw, and so on.
double head cutting saw, double mitre saw, double miter saw, uPVC profile cutting saw, glazing bead saw, V-notch saw
Jinan Stone Machine Co., Ltd. , https://www.jnstonema.com