Urban water supply in Hebei Province will gradually implement "read meter to household, outdoor reading table"

Reading: Recently, the Hebei Provincial Development and Reform Commission and the Hebei Provincial Department of Housing and Construction jointly issued the "Implementation Opinions of the Hebei Province on Accelerating the Establishment of a Stable Water Price System for Urban Residents", and the city established in the province will fully implement a stepped water price system by the end of March 2015. Hebei Province will speed up the transformation of households, realize “outdoor meter reading”, and realize household water users who read the meter to households.


Recently, the Hebei Provincial Development and Reform Commission and the Department of Housing and Construction of Hebei Province jointly issued the "Implementation Opinions of the Hebei Province on Accelerating the Establishment of a Stepped Water Price System for Urban Residents" (hereinafter referred to as "Opinions"). The "Opinions" clearly stipulates that the whole city is set up in cities. By the end of March 2015, a fully implemented step-by-step water price system will be implemented. The county towns and established towns with the conditions for implementation will strive to be implemented by the end of 2015. Household water users who implement meter reading to households (including residential property meter readings) have adopted stepped water prices.

The first ladder of water consumption per household does not exceed 10 cubic meters. According to the Opinions, the water price measurement for the ladders is in principle based on residential units and one set of residential units. For users with a large household population, they can apply for the increase of the water supply base and time limit to the urban water supply company. After the expiration, they can apply for an extension, and do not apply for the extension of the restoration of the original amount of water base. The ladder is divided into three levels, and the first step water quantity base guarantees the basic living water demand of residents. In principle, the monthly water consumption per household is not more than 10 cubic meters; the second step water quantity base reflects reasonable water for improving and improving the quality of life of residents. Demand is determined in principle by the monthly water consumption of households of households not exceeding 15 cubic meters; the third ladder water quantity is the portion of water exceeding the second step. The first step basic water price is formulated in accordance with the principles of capital preservation and low profit, and remains relatively stable for a certain period of time; the second ladder water price is formulated in accordance with the principles of compensation cost, reasonable profit, and promotion of saving; the third ladder water price fully reflects the scarcity of water resources. The principle of effective suppression of waste was established. The first, second and third step water price differentials are arranged in a ratio of 1:1.5:3. Unavailable meter-to-house users of the combined table perform basic water prices. Take one year as a stepped water price measurement cycle, the annual water consumption of household households is within the first level of water, the basic water price is executed, the water level above the first level is the second stepped water price, and the water over the second level is the third step water price. . Non-resident users who implement residents' water prices temporarily do not implement stepped water prices, and the water price is increased by 10% on the basis of the first step of the basic water price.

Accelerate the transformation of households and realize “outdoor reading tables”

The realization of “reading meters to the home and reading outdoor tables” is the key to guaranteeing the timely and accurate measurement of the user’s water quantity and the implementation of the water price ladder. The "Opinions" pointed out that for homes that do not currently implement "reading meter to households and reading outdoors outdoors", priority should be given to the conversion of households to co-table users and speed up the transformation of household tables that have not achieved outdoor reading. The transformation will be completed before the end of March of the year and the completion of the county and townships by the end of 2015. Newly-built residential water meters and household table renovations should actively promote the intelligent management of water metering. Newly-built residential construction projects must set up outdoor household water meters in strict accordance with national standards. For newly-started residential construction projects, if it is necessary to strengthen project supervision and do not design according to the requirements of “one household, one meter, and household water meter”, the construction administrative department must not issue construction licenses to ensure that “readings To the household, outdoor reading table."

The transformation of households will be based on the principles of water supply enterprises, proper government subsidies and reasonable sharing of residents, and raise funds in multiple channels and in various forms. The increased cost of the water supply company for implementing metered-in households can be included in the cost and taken into consideration in the process of water price adjustment.

Each district, city, county, and county (city) of Hebei Province will formulate and adjust concrete residential water price plans and conduct hearings. The water price plan for ladders should fully consider the economic affordability of low-income families. For low-income households, a certain number of preferential water reductions or subsidies may be set to ensure that their basic living standards are not reduced by the implementation of a step-by-step water pricing system.

Automotive Exterior Plastic Injection Mould

Plastic car exterior parts refer to front and rear bumper moulds, fog lamp moulds, and grilles and all plastic accessories, are requesting high quality with hardened steel 1.2738 or Finkl P20 hard steel in order to guarantee specified mould life such as 1000000shots. Plastic injection material is PP or ABS as per customer's requirement. Ceeto company has skilled design engineering team who is able to design plastic car bumper moulds as per part geometry, bumper mould design will be first considered hidden parting line or visible parting line according to DFM analysis and moldflow report.

Technical information for Car front bumper and rear bumper mould

1. Design software: Pro-E
2. Mould cavity: single cavity
3. Molding material: PP, ABS, PE
   
4. Mould cavity and core steel: 1.2738, P20, P20HH, 718H
5. Hot runner system: Synventive, Yudo, HRS, Moldmaster
6. Ejection system: Ejector pins, angle lifters
7. Leadtime: 120 days
8. Mould life: 500000 shots to 1000000 shots
   
9. Mould packing: wooden box

Ceeto Service Scope to manufacture car bumper mould

1. Plastic bumper product DFM analysis
   
2. Moldflow analysis
   
3. Plastic car bumper mould design
   
4. Plastic car bumper mould assembly drawing
   
5. Plastic car bumper mould machining
   
6. Plastic car bumper mould testing via injection molding machine
   
7. Plastic car bumper mould packing
   
8. Plastic car bumper samples packing
   
9. Mould spare parts preparation
   
10. We also support you for prototype mould design and manufacture
    

What we will also inspect mould material and heart treatment as follows:

1. Is any welding used on mold? Is welding process correct for the steel used?
2. Have all mold plates been stamped with markings?
3. Provide the heat treatment certificate and hardness for all applicable mold components
4. Are moving parts nitrided? Provide nitride certificate.
   

We warmly welcome you to visit us and send us RFQ, we want to be your part of suppliers and we will do our utmost efforts to make high quality of moulds and products, if you have any doubts about technical points, please don't hesitate to let us know, we are looking forward to hearing from you, thanks a lot.

Automotive Exterior Plastic Injection Mould,Injection Molding Automotive Parts,Plastic Car Front Bumper,Plastic Car Rear Bumper

Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com