The high-temperature aging room is also called the burning room. The aging testing room is for high-performance electronic products (such as: computer, display, terminal, automotive electronics, power supply, motherboard, monitor, and exchangeable charger Etc.) Simulation of a high temperature, harsh environment testing equipment, is an important experimental equipment to improve product stability and reliability, is an important production process for production companies to improve product quality and competitiveness, the device is widely used in power electronics, Computer, communications, bio-pharmaceuticals and other areas of high temperature aging room how to save energy? After more than ten years of experience, research and practice, Wes Lab Equipment Co., Ltd. has realized that a set of energy-saving power saving programs are as follows:
More and more people are now entering the aging industry, especially the construction of high-temperature aging houses. This also makes the choice of customers wide. The customer's questions have gradually increased. Which boils down to how to save energy on this block.
Wes believes that to achieve the purpose of energy-saving aging test room depends on the two sides to achieve the same purpose, the demand side should also have a sense of cooperation, of course, the design side needs to come up with a better program. As long as you do the following, the energy efficiency of aging rooms will be further improved:
1. Demand side must have certainty on the issue of aging use, can not freely say high temperature range, cause confusion to the designer, increase the number of energy design. For example, an aging room with a specific size may only require 12 kW of heating power if it is designed according to 50 degrees, but if it is designed according to 70 degrees, it needs at least 14 KW of heating. In this way, the 50 degree design method will save more material and heat than the 70 degree design method.
2. The insulation properties of the aging room must be done well. This requires a lot of effort in the insulation library. In fact, every manufacturer of aging houses will do it. Only some customers save the construction cost and save the surrounding insulation and maintenance structure. This will also result in the loss of heat during operation and increase the heating output at constant temperature.
3. When the aging room is in operation, the circulation fan must be kept running. This is also a relatively large amount of energy loss during the operation of the aging room. Energy-saving in this regard is relatively intuitive, and the smaller the overall wind-turbine motor power, the higher the energy-saving performance of the user (in the case of the same amount of heating).
4. In operation, it is necessary to reduce the number of door openings as much as possible. The more door openings, the more heat will be lost.
The above points, as long as it is done, I believe that customers will have a more energy-efficient aging room when they use it!
Recycling foam machinery
This machine is for making the recycled foam,and it is equipped with 100Kg boiler as standard,the working efficiency is very high.
This Foam re-bonding machine is mainly used for foam flocks that come from foam crusher blown into mixing drum of foam re-bonding machine after mixing with adhesive. Then the mixture is dropped into a standard size mold where it goes under hydraulic pressure to shape bonded foam. The new developed automatic foam re-bonding machine, with a steam, which can produce foam 5 times as fast as form one. Adopt pneumatic equipment to clean up remanent foam.Materials feed-in adopt compress equipment and glue water feed-in is adopting insufflation.
Sponge Foam Machine,Rebonded Foam Machine,Eva Sheet Making Machine,Foam Sheet Making Machine
SOFTLIFE MATTRESS MACHINERY CO.,LTD , https://www.softlifefoammachine.com