YD230F forest harvester type bulldozer is designed on the basis of mature product YD230 standard bulldozer according to the characteristics of forest working conditions. It fully inherits the strong power, stable performance, reliable use, fuel economy, energy saving and environmental protection of Luoyang crawler bulldozer. Its characteristics, and equipped with a dedicated logging anti-rolling cab, are safe and reliable, and are suitable for operations such as logging, skidding and towing transportation in forestry areas.
The successful offline production of YD230F forest logging bulldozers marked a major breakthrough in Luoyang's research on bulldozers adapting to forestry application technology. New progress was made in the use of bulldozers and extension of product lines, fully demonstrating the profound R&D and manufacturing heritage of Luoyang Company. . (This article comes from State Machine Heavy Industries)
Guoji Heavy Industry (Luoyang) the first forest logging bulldozer off the assembly line
Sintered NdFeB magnets are prepared by the raw materials being melted in a furnace, cast into a mold and cooled to form ingots. The ingots are pulverized and milled; the powder is then sintered into dense blocks. The blocks are then heat-treated, cut to shape, surface treated and magnetized.
As of 2012, 50,000 tons of neodymium magnets are produced officially each year in China, and 80,000 tons in a "company-by-company" build-up done in 2013. China produces more than 95% of rare earth elements, and produces about 76% of the world's total rare-earth magnets.
Neodymium magnets are graded according to their maximum energy product, which relates to the magnetic flux output per unit volume. Higher values indicate stronger magnets and range from N35 up to N52. Letters following the grade indicate maximum operating temperatures (often the Curie temperature), which range from M (up to 100 °C) to EH (200 °C).
Sintered Nd2Fe14B tends to be vulnerable to corrosion, especially along grain boundaries of a sintered magnet. This type of corrosion can cause serious deterioration, including crumbling of a magnet into a powder of small magnetic particles, or spallingof a surface layer.
This vulnerability is addressed in many commercial products by adding a protective coating to prevent exposure to the atmosphere. Nickel plating or two-layered copper-nickel plating are the standard methods, although plating with other metals, or polymer and lacquer protective coatings are also in use.
Neodymium magnets have replaced alnico and ferrite magnets in many of the myriad applications in modern technology where strong permanent magnets are required, because their greater strength allows the use of smaller, lighter magnets for a given application. Some examples are:
ï‚·Head actuators for computer hard disks
ï‚·Magnetic resonance imaging (MRI)
ï‚·Mechanical e-cigarette firing switches
ï‚·Locks for doors
ï‚·Loudspeakers and headphones
ï‚·Magnetic bearings and couplings
ï‚·Electric motors:
ï‚·Cordless tools
ï‚·Servomotors
ï‚·Lifting and compressor motors
ï‚·Synchronous motors
ï‚·Spindle and stepper motors
ï‚·Electrical power steering
ï‚·Drive motors for hybrid and electric vehicles. The electric motors of each Toyota Prius require 1 kilogram (2.2 pounds) of neodymium.
ï‚·Actuators
ï‚·Electric generators for wind turbines (only those with permanent magnet excitation)
ï‚·Direct-drive wind turbines require c. 600 kg of PM material per megawatt
ï‚·Turbines using gears require less PM material per megawatt
ï‚·Toys
Sintered Ndfeb Magnet,Block Sintered Ndfeb Magnets,Strong Sintered Ndfeb Magnet,Rectangular Magnets,Ndfeb Magnet
Jinyu Magnet (Ningbo) Co., Ltd. , https://www.magnetbonwin.com