Dongxiang Weed Crusher Straw Crusher Manufacturers

[Working principle] The hammer mill consists of several parts, such as the material slide, crushing chamber, and conveying device. There is a rotor in the crushing chamber, and the rotor is composed of a disc and a movable hammer. The screen and tooth plate are also the main working parts of the pulverizer. During operation, the processed material enters the crushing chamber from the holding slide and is subjected to repeated impacts, frictions, and collisions on the tooth plate with high-speed rotating hammers, and is gradually crushed to a desired particle size and leaks through the screen. Leaked feed is sent to the feed tube through a transport fan and a feed tube, and is separated in the feed tube. The powder is discharged from the bottom and bagged, and the air is discharged from above. [Stalk comminution use] The use of stalks and smashing can use a variety of methods and technologies. Only the technical scope includes: silage processing technology, comprehensive utilization of corn stalk processing and feed, micro-storage processing technology, yellow storage processing technology, ammoniation processing technology, Alkaline processing technology, acid storage processing technology, briquetting processing technology (can use mechanism charcoal machine), grass powder processing technology (combined with wood flour machine), expansion processing technology, pellet feed processing technology. The use of straw after smashing can be used to see what are the uses of crop straw, mostly used for industrial materials, animal husbandry, biofuels, straw and other fields. 【Texture】 The equipment adopts high-carbon alloy steel blade, high-speed strong wind suction type crushing system, stable performance, long-lasting, and good crushing effect.