In the past, the main destinations for China's tire exports were the United States and the European Union. However, the US Department of Commerce recently obtained a partial government subsidy for some Chinese tires. If the arbitration results remain unchanged, the Chinese tire industry will face a punitive tariff of 17.7% to 81.3%. The EU has also graduated from the list of countries enjoying GSP treatment since 2015, and no longer grants preferential treatment for tariff reductions. The outlook for the two traditional tire export markets in the US and the EU is worrisome, and the development needs of emerging markets are particularly urgent.
Since February 8, 2015, China's tire exports to Mexico will enjoy zero tariff treatment. Mexico’s recently passed decree adjusted the MFN tariff rates for several customs tariffs, including the new tariff code 4013.90.99 (rubber inner tube for motorcycles) and the tariff code 4011.40.01 (new inflatable rubber inner tube for motorcycles) . The Mexican side believes that there is no production of the above-mentioned products in its country, and its corresponding importing countries often do not sign free trade agreements with them. Therefore, the country decided to reduce the MFN rate of imports of the above two tariff items to 15% from the original 15%.
Here, Jiangsu Nantong Inspection and Quarantine Bureau reminds China's tire foreign trade enterprises to firmly grasp this machine.
Characteristice and Applications:
Dingzhou jinlong metal production Co.ltd is the directly factory for producing AWS E308-16 E308L-16 E309-16 E309L-16 E316-16 E316L-16 Stainless Steel Welding Electrodes. Excellent performances in slag release,weld bead appearance, weldability, corrosion resistibility at high temperature are all obtainable.It is suitable for the welding most of the stainless steel in all positions.
Notes on usage:
1. clean up the contaminations on the base metal groove and pass to pass with stainless steel brush.
2. Maintaining short arc length as possible is highly recommended.While welding with weava method,moving range should be controlled within 2.5 times of the wire`s dia.
3. Dry the electrodes at 250~300℃ for 60 minutes before use.Take out consumables for half day consumption and keep in the environment at 100~150℃ during welding process.
4. Use lower current to prevent from cracking and minimize base metal dilution.
Application:
Stainless Steel Welding Electrodes were developed for the welding of Type AWS E308-16 E308L-16 E316-16 E316L-16 E309-16 E309L-16 stainless steels but can be used for many other stainless steels including Types. They are used extensively for the welding of chemical plant equipment and may be used successfully for the welding of stainless steels provided the service temperature is less than about 700°F (375°C). The basic coating gives the highest resistance to cracking and excellent vertical welding characteristics. Operates on DC current only.
Stainless Steel Welding Electrodes
Stainless Steel Welding Electrode,Stainless Steel Welding Rod,Stainless Welding Rod,Stainless Steel Arc Welding Rods
Dingzhou Jinlong Metal Production Co., Ltd. , http://www.weldingelectrodefactory.com