Because most people are relatively stable economic situation, many families have so twelve scooter, resulting in the city and traffic on the streets are more crowded, and like the warehouse gate semi-trailer truck in a parking time, It will cause great inconvenience. When the vehicle has not been used for longitudinal parking, it is necessary to separate steering wheel operation commutation operations as far as possible. When the parking locker semi-trailer needs to stop, the required length is about 1.5 times the body length. As long as the target of the move and the position of the stop are well remembered, it is possible to make the warehouse-type semi-trailer reach the exact location on the parking lot.
1. If the warehouse-type semi-trailer needs to be parked side-by-side with an adjacent car, it is necessary to confirm that there must be a distance of about one meter between the car and the neighboring car. After confirming the safety of the car, it is necessary to carry out a straight line reversing. When the rear bumper of the silo-type semi-trailer is side by side, stop immediately.
2. When the warehouse gate type semi-trailer is in a stopped state, turn the steering wheel to the right until it hits the end, then slightly loosen the brake pedal and use the wriggle function of the warehouse-type semi-trailer to reverse the car. When the left side of the body reaches a straight line that extends on point A, it can be stopped.
3. Under the condition that the warehouse-type semi-trailer is stopped, turn the steering wheel so that the wheel can be turned back, then slowly reverse the line, when the left rear wheel of the vehicle has reached the outer white line of the parking space. If you do, you can stop the retire.
4, warehouse-style semi-trailer truck will turn the steering wheel to the left and hit the end, slowly back. When the vehicle is parallel to the road shoulders, it is necessary to transfer the direction back to the vehicle so that it can be returned to the vehicle, and the vehicle can be stopped at a position parallel to the road shoulder. It should be noted here that there should be no collision with the rear vehicles, because the semi-trailer body is relatively large, so it is necessary to avoid collisions with other vehicles.
Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment.
Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter
WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionwelding.com