It is reported that Suining, Jiangsu last year, the county added 124 new food drying machines, batch capacity of 2194 tons, the county's grain production area drying batch level of 25%. In the new year, they will focus on the construction of a grain drying center, focus on two tasks, promote the construction of mechanized demonstration areas for the entire grain production, and train around the construction of the drying center.
People are diligent in the early spring. Recently, the meeting room of Agricultural Machinery Bureau of Suining County in Jiangsu Province has gathered agricultural cooperatives and large farming families from the county, and some grain dryer distributors and manufacturers. Agricultural Machinery Cooperatives and large farm owners talked about the achievements made in the development of grain drying centers in 2016, problems in field production, and advice on product quality and distributor after-sales service; dryer manufacturers talked about the company's new dryers Product advantages and commitments in the new year; dealers talk about the new year's service commitments. Some large agricultural machinery manufacturers have stated that in the new year, we must expand the construction of food drying centers and expand the scope of socialized services so as to strive for a new level in 2017.
As of the end of 2015, the county’s drying capacity of grain production areas was only 2,000 tons, and the drying capacity in the producing areas was only about 10%. Grain drying has always been a short board for the county’s agricultural mechanization work, which has constrained the county’s agricultural cooperation organization to some extent. And the development of large grain producers. In 2016, the county put forward the development idea of ​​“a foundation for one year, two years of promotion, and three years of effective resultsâ€. Through the “government guidance, sector participation, social enterprise leadership, and farm household voluntary†model, the focus was to fill up the grain drying process. To do this shortboard, vigorously promote the construction of drying service centers, and drove the drying capacity of the county's production areas to more than 20%, ensuring that in 2017, it will meet the application requirements for the completion of mechanized demonstration of grain production. This working idea has been approved by the main leaders of the county party committee and county government, and a special subsidy of 2 million yuan has been allocated from the county finance, which is specifically used to subsidize the construction of grain drying centers.
After one year of hard work, the county added 124 new food drying machines with a batch processing capacity of 2194 tons (accounting for 50% of the entire new city of Xuzhou), and the county's grain production area drying batch level reached 25%. During the busy period of the "three autumns" last year, the county suffered a continuous and cloudy rainy weather that has not been encountered for decades. Due to the dramatic increase in our dryers, the mildew damage to food has been greatly reduced, and food production safety has been ensured. In 2016, the new farmers on the dryer project, most of the buyers to recover investment costs that year, reduce the loss of more than 30 million yuan in grain mildew, has been the county leaders and grain farmers agree. At the same time, it successfully declared the province's food production full mechanization model county project.
At the symposium, the leaders of the Bureau said that in the new year, the construction of the grain drying center will focus on two tasks: First, make good use of the project, focus on the construction of mechanized demonstration projects throughout the grain production, and use adequate living projects. Ensure that the project funds maximize their effectiveness. Second, increase publicity and training. Organize cooperation organizations around the construction of drying centers, train large farms, visit and study, and broaden their horizons. At the same time, increase the publicity and mobilization of news media. Through two years' efforts, the county's drying capacity of grain production areas will be increased to more than 50%, and it will pass the provincial acceptance of mechanized demonstration of food production.
Stuffing sand is an necessary refractory material for electric furnace taphole. Mainly made by magnesium olivine sand and fuse magnesite as raw material, adding the carbon material as additives, composite according to the specially appointed grain size and weight percent. Finally mixing them and produce filling sand. After testing , it is proved that it has good dispersion and mobility,high refractoriness, no sintering, no clogging. Also the tapping drainage rate is more than 100% and the service temperature is more than 1750 ℃. It won`t react with molten steel and alloy composition. Storage quality does not change. So it can satisfy steel making process requirements and is the most Ideal refractory material for eccentric furnace steelmaking.
Ceramic Foundry sand called Chine Cerabeads, ceramsite sand and cerasand too, is made from high quality bauxite, by re-fused and blown to ball type. With advantage of fine surface smooth finish and air permeability, it is a new type casting material for precision casting, coated sand and self hardening sand etc.
Filing Sand,Surfing Sand,Ladle Surfing Sand,Ladle Filing Sand
Jinan New Emei Industrial Co.Ltd , https://www.emrefractory.com