Electric Copper Wire Self-Priming Gardon Water Pump with Brass Impeller

    Electric Copper Wire Self-priming Gardon Water Pump with Brass Impeller

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

PS127 SERIES INTELLIGENT WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.


                                                                     

                                                  About us

     Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.




FAQ     Electric Copper Wire Self-priming Gardon Water Pump with Brass Impeller

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

PS127 SERIES INTELLIGENT WATER PUMPS FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.


                                                                     

                                                  About us

     Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.




FAQ

Clips and Fasteners are most commonly categorized as flat or sheet material that is formed into simple or complicated shapes. Most often, Clips and Fasteners are manufactured using both low and high carbon steels, depending on the application. In some applications, high carbon spring steels are utilized where a spring force is required that cannot be obtained with normal spring forces. When high carbon spring steels are used for manufacturing, it is a standard requirement that the product is heat treated and quenched to a hardness level that allows the product to flex without deforming. Heat treating and oil quenching are commonly used for the hardening process, but an Austemper heat treating process is typically the best practice for eliminating heat treat deformation.

Steels most commonly used in our process for manufacturing Clips and Fasteners are either low carbon, cold rolled steel (without heat treatment), and high carbon spring steels ranging from Grade 1050 to 1095, along with Stainless Steels and precious metals such as Brass, Phosphor Bronze, and Beryllium Copper. Clips and Fasteners that we manufacture typically range in material thickness of .010″ up to .080″, with many of our prototype and short run orders ranging from these sizes. We also have the capability of manufacturing designs in a wide range of shapes and sizes. We can supply Clips and Fasteners with a variety of special finishes or coatings to your specification along with various heat treating requirements.

Clip Materials

Material	Grade	Specification
High Carbon Spring Steel Strip	1050	ASTM A682 (AISI 1050)
	1065	ASTM A682 (AISI 1060)
	1070	ASTM A682 (AISI 1070)
	1074	ASTM A682 (AISI 1074)
Stainless Steel Strip	301	ASTM A666
	302	ASTM A666
	316	ASTM A582 (AISI 316)
	17-7 PH	ASTM A693 (631) (AMS 5529)
Non-Ferrous Alloy Wire	Phosphor Bronze	ASTM B103
	Beryllium Copper	ASTM B194
High Temperature Alloy Wire	Inconel 600	ASTM B168 (AMS 5540)
	Inconel x750	AMS 5542
Low Carbon Steel	Cold Rolled Steel (CRS)	ASTM A1008 (AISI 1008/1010)

Stainless Steel Clip

Spring Steel Clip,Stainless Steel Clip,Spring Clip,Stainless Clips

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.jiantongstamping.com