1. The license plate should be installed without any deformation or punching, and it should be perpendicular to the ground. The error should be less than 15 degrees 2. The camera should be fixed on each side with two special seals for license plates issued by the issuing authority. The former number plate must be installed in the middle or right side of the front lower front part of the vehicle body. The rear number plate must be installed in the middle or left position of the front lower rear part of the vehicle body. 5. All production after October 1, 1992 All types of motor vehicles must be designed and manufactured in accordance with the above requirements and the size specifications of the number plate to manufacture corresponding mounting positions or number plate racks. 6. Large-sized trucks and trailers must be spurted to write the magnification number of the car number plate at the rear fence board. 2.5 times, the font standard is the same as the number plate. 7. The large truck trailer should have a trailer plate (a semi-trailer host plate), and spray the amplified number to issue a driving license. That is, the host and the trailer are not a number plate.
Decorative Classical Ceiling Fan
This decorative classical ceiling fan has different control model which can fit your different type of control like. Traditional pull chains included for easy "on and off" adjustments and remote control can make life easier. Light kit like bulbs and LED module are also included. LED module has different color temperature for different situations.
Classic Decorative Ceiling Fan,Classic Decorative Ceiling Fan With Light,Classic Decorative Ceiling Fan With Led,Classic Decorative Ceiling Fan With Led Light
ZHONGSHAN UFAN ELECTRIC APPLIANCE CO. LTD , https://www.ufanlight.com