The transport of timber is related to economic infrastructure. For large timber transporters, the transport efficiency of timber should be improved so that better economic benefits can be achieved. So how can we make large timber transporters improve the efficiency of transporting wood? We need to optimize the transport program, which can be considered from the following aspects.
First, the wood is roughed. In order to maximize the amount of wood on the transporter , the timber should be roughed to a certain degree, and the wood should be made into a neat shape, and the excess branches should be cut off. Uniform wood can save more space and can be placed on a larger number of vehicles. The processing of wood does not need to be too elaborate, as long as the irregular shape can be trimmed off. In addition, do not process the wood too carefully during processing because the use of the wood cannot be determined, so there is no need for fine processing.
Second, make certain modifications to the transport vehicle. If the transporter cannot meet the shipping requirements of the wood, the vehicle can be properly modified. However, it should be noted that the modification of the vehicle should comply with the relevant requirements. The vehicle's power system cannot be modified at will, only the size of the vehicle body can be modified, and the maximum capacity of the vehicle cannot be exceeded, otherwise it is easy to be transported. There is a dangerous situation. Modification of the vehicle is not a simple matter. It should be based on the needs of the use of a reasonable design, and to ensure the quality of the modified, so that it can be a smooth and safe transport of timber to the desired place.
Third, the transport of wood is reasonably placed. The reasonable placement of wood can also save a certain amount of space. Orderly placement can allow vehicles to accommodate more wood. According to the experience, reasonable lengths and lengths of wood should be placed to make full use of the space inside the carriage so as to increase the efficiency of single transportation. In addition, after placing, the wood on the car should be fixed. In particular, the log must be fixed in the interior of the carriage. Otherwise, it may easily fall off during transportation, which may cause certain risks.
We have supplied our Lighting poles to Australia, Columbia, England, Kuwait, Iraq, Philippines, Pakistan and etc.
Our Lighting poles are made from quality sheet through bending, forming, automatic welding and hot galvanization. We can reach one-run machining length of 14m and can bend sheet of thickness up to 45mm. We adopt advanced welding procedures, automatically weld main joints and reach rank-II welding quality.
Lighting Pole, Transmission Line Pole, Solar Lighting Pole, Single Arm Lighting Pole
Jiangsu Xinjinlei Steel Industry Co., Ltd. , https://www.jinleisteelpole.com