The hand selection method is a sorting method based on the difference in color and appearance between lithium minerals and gangue minerals. The selection granularity is generally 10~25 mm, and the determination of the lower particle size limit depends on economic benefits. Hand selection is the earliest method of mineral processing used in the history of lithium mine production. The United States used this method to produce spodumene concentrate from the pegmatite deposit in the Black Mountain area of ​​South Dakota as early as 1906. In addition to spodumene, but also for the production of hand-selected lepidolite, petalite, lithium phosphate, lithium aluminum ore stone. United States South Dakota Black Hills region is the first US lithium mining mining area, has used hand-selected method selected spodumene concentrates from pegmatite ore, sometimes it comes to recover some of feldspar minerals and heavy metals. The first deposit in the Black Mountain area contains 1.5 to 1.7% of Li 2 O. The ore is mainly composed of spodumene, quartz , micro-plagioclase, albite, muscovite, apatite and tourmaline . In 1948, a hand-selected method was used to select a spodumene concentrate with a yield of 10.5%, the grade was 4.8% Li 2 O, and the recovery rate was 30-40%. Due to the low economic efficiency, the plant reformed the process in 1949, 3.3~ The 38 mm grain grade was changed to heavy medium beneficiation, and the 38-300 mm grain grade ore was still selected by hand to remove waste rock. In the 1950s, China’s No. 1 Mine and No. 3 Mine in Xinjiang have been producing the spodumene concentrate by hand. The ore contains 1.5 to 1.8% Li 2 O, and the hand-selected concentrate grade is 5 to 6% Li 2 O. The recovery rate is 20-30. %. The hand selection method has been generally replaced by flotation or other methods due to its high labor intensity, low productivity, poor beneficiation index, and waste of resources. However, in areas where labor is cheap, hand selection is still a kind of coarse-buried lithium mine. An important method for producing lithium concentrate. The following figure shows the principle flow of the hand picking of the Weigang pegmatite lithium mine.
The granule pegmatite lithium mine hand selection process
Conveyor Bearing is rolling element bearing used in conveyor system. Such as Deep Groove Ball Bearing used in bulk Conveyor Idler Roller , Spherical Roller Bearing and Self-aligning Ball Bearing used in Conveyor Drum Pulley etc. which plays a role of reducing the friction among the components.
Heavy (or bulk) conveyors often endure contaminants and dirty in harsh environment. The most important part of idler roller is bearing. It is unique design deep groove ball Bearing For Conveyor Idler that meet all challenges: extremely different temperatures, low-speed, bulk materials handling, humidity, dust, dirt, as well as noise and vibration environments.
Conveyor Bearing usually need large Clearance such as C3/C4, Reinforce iron retainer or unique nylon retainer(superior anti-static and anti-sticking) and inner/Outer rings, Sealed type, with good anti-sticking performance. While cannot use standard Bearing, they will cause big running resistance, brake and reduce lifetime of bearing.
Main Products:
6200/6300 series deep groove Ball Bearing 6200/6300 series is well suited for low to heavy radial loads and can be configured for various application speeds and running precision requirements. Reinforced iron Retainer, Super-finished deep groove, smooth race, thicker inner and outer ring.6204---6310 6204/C3---6310/C3 6204/C4---6310/C4
6204KA---6308KA 6204KA/C3---6308KA/C3 6204KA/C4---6308KA/C4
6204-2RS---6310-2RS 6204-2RZ---6310-2RZ 180204---180308
60204---60310 6204KA-Z---6308KA-Z 6204TN-Z---6308TN-Z
Spherical Roller Bearings for mining machine, crusher, Conveyor Pulley etc. ultra-harsh environments
Spherical roller Bearing For Conveyor drum pulley
22210 CA/CC /W33---22256 CA/CC /W33 22310 CA/CC /W33---22348 CA/CC /W33
Double-row spherical roller bearings are capable of carrying heavy loads in both radial and axial directions. They are self-aligning, thus compensating for shaft deflections and seat misalignment. Available in a variety of standard and special designs, with cylindrical and tapered bore.
Self-Aligning Ball Bearing for conveyor drum pulley.
Main products are 1308-1316
With more than 10 years of conveyor bearing experience, we can assist you with selecting the appropriate bearings for your system. Welcome to visit our Factory. If you have any questions, please contact with us directly.
Conveyor Bearing
Conveyor Bearing,Bulk Conveyor Bearing,Belt Conveyor Bearing,Bearing For Conveyor
Shandong Xinkaite Bearing Co., Ltd. , https://www.idlerbearing.nl