After preliminary investigation and meticulous preparations, the opening ceremony for the construction of China Petrochemical Catalyst and New Material Evaluation Test Base was held before the China Petroleum and Petrochemical Research Institute. The construction of the pilot test base will significantly increase the core competitiveness of China's petrochemical catalysts, and will have an important impact on catalyst development, industrial transformation, and technical services, and will promote the industrialization of scientific research results.
The base will use advanced experimental equipment, sophisticated analytical instruments and pilot plant with high automation level, and through the benign cycle of small-scale trials-pilot-scale trials, shorten the research and development cycle of chemical catalysts and industrial conversion process, and promote chemical industry The technical transformation of the catalyst reduces the risk of industrial applications.
It is reported that the chemical catalyst and high-performance synthetic material evaluation test base plan to be completed within two years. After the test base is put into production, a scale-up production scale of 300 tons of non-precious metal-supported hydrogenation catalyst and 200 tons of dehydrogenation catalyst can be formed.
Construction Machinery Tower Crane is a new-style elevating machinery specially designed for the construction of tall buildings and equipment installation, is a type of self-raising multi-purpose tower crane equipped with level arm support, and it allows trolley derricking and upper slewing.
Construction Building Crane adopts standard section hydraulic lifting and connecting, and can decide the crane height according to the actual height of the building, and at the same time the lifting capacity will not be affected.
The Max. attached height of Hydraulic Construction Building Hammerhead Tower Crane can reach 70m.
Hammerhead Tower Crane has scientific layout and beautiful appearance. The operator's room is set independently on one side, with good vision field. It creates a good working environment for the operator.
Hammerhead Tower Crane Specification Table:
TYPE |
QTZ63C (TC5211) |
QTZ63D (TC5510) |
QTZ63E (TC5610) |
QTZ63 (TC5013) |
|
Rated lifting moment (KN.m) |
630 |
630 |
630 |
630 |
|
Working range (m) |
3~52 |
3~55 |
3~56 |
3~50 |
|
Load |
Tip load (t) |
1.1 |
1 |
1 |
1.3 |
Max load (t) |
6 |
6 |
6 |
6 |
|
Lifting height |
Free standing (m) |
41 |
41 |
40 |
40 |
Adhesion type (m) |
120 |
120 |
120 |
120 |
|
Lifting speed |
Double rates (m/min) |
80/40/7 |
80/40/7 |
80/40/7 |
80/40/7 |
Fourfold rates (m/min) |
38.5/19.2/3.5 |
38.5/19.2/3.5 |
38.5/19.2/3.5 |
38.5/19.2/3.5 |
|
Min stable fall speed (m/min) |
≤7 |
≤7 |
≤7 |
≤7 |
|
Slewing speed (m/min) |
0-0.62 |
0-0.62 |
0-0.62 |
0-0.62 |
|
Trolley-travelling speed (m/min) |
20/40 |
20/40 |
20/40 |
20/40 |
|
Jacking speed (m/min) |
0.5 |
0.5 |
0.5 |
0.5 |
|
Balance weight (t) |
9.18 |
10.7 |
/ |
/ |
|
Upper chord of jib (20#) |
Φ102*8 |
Φ102*8 |
Φ102*8 |
Φ102*8 |
|
Mast section size (mm) |
1611*1611*2500 |
1611*1611*2500 |
1835*1835*2500 |
1835*1835*2500 |
|
Mast section material (Q235B)
|
∠160*16& ∠160*14 |
∠160*16 |
â–¡135*135*10 |
∠160*16 |
Application Area:
Hammerhead Tower Crane have competitive price and excellent quality, suitable for all kinds of construction project and can work under all kinds of work condition.If you have any questions, please contact with us directly. Hammerhead Tower Crane are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Hammerhead Tower Crane
Hammerhead Crane,Stationary Hammerhead Tower Crane,Hammerhead Widely Luffing Tower Crane,Hammerhead Tower Crane
Jinan East Machinery Co.,Ltd. , http://www.jneastmach.com