Model NO.: c342
Principle: Volumetric Meter
Medium Pressure: General Water Meter
Work Environment: Dry Water Meter
Stucture: Traditional
Trademark: cixier
Transport Package: Paper Carton
Origin: China
HS Code: 9028909000
gear  for water meters from DN15-50,include multi jet and single jetplastic material
Multi-jet Dry Type Vane Wheel Water Meter
It is a multi-jet super dry water meter for residentialÂ
application in sizes 15mm-20mm for cold  and hot meter.
Features
Compact design with smaller meter body.
Brass body is only 570g weight for save cost
45° inclined register, hot wire tamper proof.
Magnetic drive mechanism with anti-magnetic protection.
External regulation device
Standards ComplianceÂ
Directive 2004/22/EC on measuring instruments;Â
the European  Standard EN14154+A1+A2: Water Meter;Â
the International  Organization of Legal Metrology OIML R-49: 2006(E)
Optional FeaturesÂ
Several lengths and connections available on request
Non return Valve
Reed switch option
Working Conditions
Water temperature: ≤50ºC for cold water meter Â
                   ≤90ºC for  hot water meterÂ
Water pressure:   ≤1MPa or 1.6MPa optional
          (10bar or 16bar option)
Accessories
Each meter has one set coupling optional: 2pcs coupling, 2pcs coupling nuts and 2pcs washers.
Installation requirements
The meter should be installed in horizontal position with the direction of the flow asÂ
indicated by the arrow cast in the meter body with the register face upwards.
Pipeline must be flushed before installation.
The meter should be constantly full of water during operation.
Maximum Permissible Error
In the lower zone from Qmin inclusive up to but excluding Qt is ±5%.
In the upper zone from Qt inclusive up to and including Qs is: cold water meter ±2%.
DN(mm) | Â | 15 | 20 |
Size(inch) | Â | 1/2" | 3/4" |
Q4(m³/h) |  | 3.125 | 5 |
Q3(m³/h) |  | 2.5 | 4 |
R80 | Q2(l/h) | 50 | 80 |
 | Q1(l/h) | 31.25 | 50 |
R100 | Q2(l/h) | 40 | 64 |
 | Q1(l/h) | 25 | 40 |
Max.Reading (m³) | 9999 | ||
Min.Reading (Liter) | 005 | ||
Max.Pressure (bar) | 16 | ||
Pressure Loss (ΔP) | 63 | ||
Max.Temperature | T30 or T90 |
Â
Sheet Metal Cutting parts are usually processed by the following methods: drawing milling, wire cutting, plasma cutting, oxy-acetylene flame cutting, die stamping, high-pressure water cutting and CO2 laser cutting.Various cutting and blanking methods have their advantages and disadvantages.Accuracy, speed and cost are different.There is a certain scope of application in industrial production.Choosing the most convenient and adaptable machining method is the task facing the manufacture of Sheet Metal Parts for liquid rocket engine.
Sheet Metal Cutting
Sheet Metal Cutting,Laser Cutting Plate,Sheet Metal Cutting Tools,Sheet Metal Cutting Service
YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com