Waste BOPP PE Film Granulate Machine with Horizontatol Water-Ring Hot Die Face Pelletizing Way

 

Waste BOPP PE film granulate machine with Horizontatol water-ring hot die face pelletizing way. It also can do with vertical water-ring hot die face pelletizing way and wind cooling die face pelletizing way to meet the requirement of different material. 

Material is cut,pre-dried,pre-heated,pre-homogenized and compacted in the shredding/compactor drum.

Many materials can be processed directly without need of the upstream pre-shredding,resulting in a dramatic reduction in operational costs.

Less power consumption cost per kilogram,high throughput,reduced floor space occupation and operator attendance

This line can be used to process wasted thermo plastics: 
such as PA, PP, PS, PE, EPE, EPS,PET,UPS,ABS Film etc.  Like agriculture film/farm film and big bag.
  
Different screw design can produce different plastics.This is for hard or differend kinds of film.

Material types:Woven bag,printed LDPE film,film(rolls,loose,bundled),agricultural film waste,foamed plastics(EPS) and fibre, 

 

Metal detector on the Belt conveyer

Customer can decide to install or not install metal detector on the belt. Metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.

Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
5. no air in the pellets.
6. The machine wih long life.

The advantages of the compactor
1. Counter current technology
      Hight process stability thorugh improved material intake ensures constantly high output over a considerably broader temperature rang
       Higher flexibility and operational reliability with a variety of materials
       Increased throughputs with the same plant size for more productivity
2. Smart Start
       Remarkably easy operate thanks to logical, clearly structured and simplified handing and ultramodern ergonomiic touchscreen disply.
       Fewer buttons, more user-friendliness-thanks to high degree of automat on including extensive control packages.
       The right recipe for every application-saved processing paramerter can be loaded easily and conveniently from the recipe management system at the push of a button
3. Save
        Lower specific energy requirements thanks to a complete package featuring design and process engineering measures including the new direct drive for the extruder screw
        Lower production costs through optimised control technology and high-quality, energy-efficient components such as high-performance motors
        Additionally, the parctical energy dispaly on your operating panel gives you a constant overvies of eenergy consumption at all times, thus enabling you to take specific measures to optimise consumption
        Environmental protection
More machine photoes
Belt conveyer

1.Transport method:By strap

2.Power of motor:2.2kw

3.Work length:5000 mm

4.Width of strap:600mm(Different type of machine with different width)

5.Conveying speed:1-10m/min

6.Weight:3000kg

7.Belt material:PVC , and brecket material: Carbon steel

Customer can decide to install or not install metal detector on the belt. Metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.

Compactor

The compactor on the extruder. the function of crush and compress the material, it works by the running of rotary cutter, stable cutter and the rotary cutter  cut the material and by friction the material will be compred. And with cutter base running the material can be better melt and flow into the extruder.

Water-ring hot cut die(For PP and PE the die is different)

Machine line

Extruder with horizontal water-ring cutter system

Gear box:high torque,low noise,external connect with cooling recycling system;

Screw: 38CrMoA1A,Nitrogen treatment;

Barrel: 38CrMoAlA,nitrogen treatment,barrel wind-cooling; temperature controller

Lubrication:forces lubricating;

Vacuum system:vacuum pump motor power 1.1kw

Pameter of such kinds of machine

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

 

Waste BOPP PE film granulate machine with Horizontatol water-ring hot die face pelletizing way. It also can do with vertical water-ring hot die face pelletizing way and wind cooling die face pelletizing way to meet the requirement of different material. 

Material is cut,pre-dried,pre-heated,pre-homogenized and compacted in the shredding/compactor drum.

Many materials can be processed directly without need of the upstream pre-shredding,resulting in a dramatic reduction in operational costs.

Less power consumption cost per kilogram,high throughput,reduced floor space occupation and operator attendance

This line can be used to process wasted thermo plastics: 
such as PA, PP, PS, PE, EPE, EPS,PET,UPS,ABS Film etc.  Like agriculture film/farm film and big bag.
  
Different screw design can produce different plastics.This is for hard or differend kinds of film.

Material types:Woven bag,printed LDPE film,film(rolls,loose,bundled),agricultural film waste,foamed plastics(EPS) and fibre, 

 

Metal detector on the Belt conveyer

Customer can decide to install or not install metal detector on the belt. Metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.

Machine detail parameter

The advantages of this machine
1. Highly efficent: the machine is automatic and with less power consumption.
2. Special screw design: We will design the screw up to customer different material and the material of screw and barrel can be 38CrMoAL or bimetallic.
5. no air in the pellets.
6. The machine wih long life.

The advantages of the compactor
1. Counter current technology
      Hight process stability thorugh improved material intake ensures constantly high output over a considerably broader temperature rang
       Higher flexibility and operational reliability with a variety of materials
       Increased throughputs with the same plant size for more productivity
2. Smart Start
       Remarkably easy operate thanks to logical, clearly structured and simplified handing and ultramodern ergonomiic touchscreen disply.
       Fewer buttons, more user-friendliness-thanks to high degree of automat on including extensive control packages.
       The right recipe for every application-saved processing paramerter can be loaded easily and conveniently from the recipe management system at the push of a button
3. Save
        Lower specific energy requirements thanks to a complete package featuring design and process engineering measures including the new direct drive for the extruder screw
        Lower production costs through optimised control technology and high-quality, energy-efficient components such as high-performance motors
        Additionally, the parctical energy dispaly on your operating panel gives you a constant overvies of eenergy consumption at all times, thus enabling you to take specific measures to optimise consumption
        Environmental protection
More machine photoes
Belt conveyer

1.Transport method:By strap

2.Power of motor:2.2kw

3.Work length:5000 mm

4.Width of strap:600mm(Different type of machine with different width)

5.Conveying speed:1-10m/min

6.Weight:3000kg

7.Belt material:PVC , and brecket material: Carbon steel

Customer can decide to install or not install metal detector on the belt. Metal detector can check the melt, if there is melt the detector will alarm and stop, peope chect out the melt and throw it way, and restart the belt conveyer again.

Compactor

The compactor on the extruder. the function of crush and compress the material, it works by the running of rotary cutter, stable cutter and the rotary cutter  cut the material and by friction the material will be compred. And with cutter base running the material can be better melt and flow into the extruder.

Water-ring hot cut die(For PP and PE the die is different)

Machine line

Extruder with horizontal water-ring cutter system

Gear box:high torque,low noise,external connect with cooling recycling system;

Screw: 38CrMoA1A,Nitrogen treatment;

Barrel: 38CrMoAlA,nitrogen treatment,barrel wind-cooling; temperature controller

Lubrication:forces lubricating;

Vacuum system:vacuum pump motor power 1.1kw

Pameter of such kinds of machine

1. We supply below necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provides one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you with DHL courier or other way within 7 workdays after receiving the complainant. And send the technicians to the buyer's factory for maintaining. All charges are in our account.

3. After one year guarantee, If you need we can provides payable spare parts and technician's VISITING maintenance, and any broken spares we can send you soon as possible.

4. We trust that our quotation meets with your requirements and we will gladly furnish you with further information.

5. 24Hours service :  Cell+86-13915707468
                             

A cyclone sepatation is a method of removing particulates from an air, gas or liquid stream, without the use of filters, through vortex separation. Totational effects and gravity are used to separate mixtures of solid and fluids. A high speed rotating air flow is established within a cylindrical or conical container called a cyclone. Air flows in a helical pattern, beginning at the top of the cyclone and ending at the bottom end before exiting the cyclone in a straight stream through the centre of the cyclone and out the top. Larger particles in the rotating stream have too much inertia to follow the tight curve of the stream, and thus strike the outside wall, then fall to the bottom of the cyclone where they can be removed. In a conical system, as the rotating flow moves towards the narrow end of the cycone, the rotation radius of the stream is reduced, thus separating smaller and smaller particles. The cyclone geometry, together with volumetric flow rate, defines the cut point of the cyclone. This is the size of particle that will be removed from the stream with a 50% efficiency. Particles larger than the cut point will be removed with a greater efficiency, and smaller particles with a lower efficiency as they separate with more difficulty or can be subject to re-entrainment when the air vortex reverses direction to move in direction of the outlet

Cyclone Dust Collector

Cyclone Dust Separator,Cyclone Dust Extractor,Dust Collector Cyclone Separator,Industrial Cyclone Dust Collector

Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com