Small Quick Respones Solenoid Valve Pneumatic Actuator

Trademark: KT
Specification: CE, ISO9001, FDA
Origin: Zhejiang
HS Code: 8543709990
Trademark: KT
Specification: CE, ISO9001, FDA
Origin: Zhejiang
HS Code: 8543709990
Small Quick Respones Solenoid Valve Pneumatic Actuator

Features

1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material

Specifications

1). Pressure Range: Max. Working pressure 10bar
2). Air pressure: 2.5bar~8bar
3). Adjustment Range: 90° ± 5°
4). Ambient temperature: -20 ~ +90° C
5). Type: Single-acting (spring return), double-acting
6). Optional accessories: Solenoid valves, limited switch, electric position
7). Lubrication: All the moving parts are coated with lubricants, extending their service life
8). Life Time: One million time

Standards
A. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
5211, the axle assembles orifice according to DIN 3337
B. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate
C. Interface between actuator and signal box: According to VDI/VDE 3845

Introduction

I. Actuator Body
Boy material is aluminium alloy. Internal and external surface are treated with anodic oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fuction of actuator and minimum friction against pistons can be guaranteed.

II. End Cover
End cover material is die-casting aluminium. End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance.

III. Drive Shaft
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc.

IV. Piston
Piston material is die-casting aluminium alloy. Maxmium torque can be output when the actuator is actuated with certain pressure.

V. Piston Seal
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements.

VI. Travel Adjustment
Plus/Mimus 5 degree travel can be adjusted through the two bolts.


Contact

Thanks for your visiting.

If you have any questions about our products or company, please do not hesitate to contact us.

Contact Person: Cathy Zou Small Quick Respones Solenoid Valve Pneumatic Actuator

Features

1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material

Specifications

1). Pressure Range: Max. Working pressure 10bar
2). Air pressure: 2.5bar~8bar
3). Adjustment Range: 90° ± 5°
4). Ambient temperature: -20 ~ +90° C
5). Type: Single-acting (spring return), double-acting
6). Optional accessories: Solenoid valves, limited switch, electric position
7). Lubrication: All the moving parts are coated with lubricants, extending their service life
8). Life Time: One million time

Standards
A. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
5211, the axle assembles orifice according to DIN 3337
B. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate
C. Interface between actuator and signal box: According to VDI/VDE 3845

Introduction

I. Actuator Body
Boy material is aluminium alloy. Internal and external surface are treated with anodic oxidation and polishing. Outer surface is nickle plated so that the anti-corrosion fuction of actuator and minimum friction against pistons can be guaranteed.

II. End Cover
End cover material is die-casting aluminium. End cover is treated with epoxy polyester so as to best guarantee the anti-corrosion performance.

III. Drive Shaft
The drive shaft material is medium carbon steel with fine processing and nickle plating so that the pistons have better quality in anti-corrosion, anti-friction, etc.

IV. Piston
Piston material is die-casting aluminium alloy. Maxmium torque can be output when the actuator is actuated with certain pressure.

V. Piston Seal
NBR-70 rubber sealing is applied to ensure the normal and reliable performance of actuator under normal temperature. FPM can be also applied according to clients' requirements.

VI. Travel Adjustment
Plus/Mimus 5 degree travel can be adjusted through the two bolts.


Contact

Thanks for your visiting.

If you have any questions about our products or company, please do not hesitate to contact us.

Contact Person: Cathy Zou

PP-R Pipe Fitting Mould

PP-R Pipe Fitting Mould,Best PP-R Pipe Fitting Mould,PP-R Pipe Injection Molding,PP-R Pipe Mould For Sale,PP-R Mould

TAIZHOU HUANGYAN SOLIDCO MOULD CO.,LTD , https://www.solidcomould.cn

This entry was posted in on