Poor pumping water pump repair

     Pump violent vibration
　　
May be uneven rotor, or coupling poor, bearing wear and tear may also be rotating part of the parts loose, rupture; may be due to the pipe stent is not strong and so on. Can be taken to adjust, repair, reinforcement, replacement and other methods to deal with.
　　
Piping leaks or leaks
　　
Nuts may not be tightened during installation. If the leakage is not serious, in the place of leakage or leakage coated with cement or asphalt mixing oil slurry. Temporary repair can be painted wet mud or soft soap. If leakage occurs at the connector, tighten the nut by hand. Leak serious must re-disassembly.
　　
Overheating filler
　　
As a result of the packing is too tight, the cooling water can not enter the packing, or the shaft surface is damaged. Proper relaxation of packing can be taken to clear up the sealing tube blockage and other measures. Filler wear must be replaced by new ones. Soak it in the oil before installation, insert it in turn, and cut it off, which will reduce water leakage. After the last lap packing is installed, the gland should be installed tightly and the tightness should be adjusted during operation.
　　
Pump is not water or not drained
　　
The reason for the end of the valve stuck, filtered part of the blockage, water absorption is too high or water leaks, but also may be due to the wrong direction, impeller runner blockage and so on. After one by one inspection, respectively, to take the end of repair valve, remove the blockage, correct steering, cleaning impeller and other measures to deal with.

The Cutting Robot system is made up of industrial robot, robot controller, teaching device, cutting power supply and fixture. Cutting robots are capable of cutting lines, curves, and grooves in different sizes and thicknesses. The system has the characteristics of high work efficiency, simple structure, good repeatability and high reliability.

Curved Plate Bevel Cutting Robot 

Scope of application 

This equipment is suitable for the measurement,scribing,second precise cutting and variable angle double-sided groove cutting of the thick walled pressure vessels of ellipsoidal head plate, spherical tank ball and other types. It`s suitable for quick, batch, high precision cutting of the large scale curved plate. This product is successfully applied to the measurement, scribing and high precision bevel cutting of CV large elliptical head plate in the Chinese third generation nuclear power technology-AP1000

Performance characteristics 

• It can noncontactly measure of curved plate pressing precision without measurement templet and generate report automatically.

• It can automatically generate optimal cutting path according to the measured data and precisely scribe without scribing templet.

•It can automatically cut the bevel of the curved plate without laying the track and track the thermal deformation of the curved plate cutting. It has the feature of high cutting precision.

• Ensure the arc length precision of each steel plate, thus ensuring the interchangeability of steel plate. The quality of the cutting surface is high, thereby reducing the grinding and welding defects

• It can automatically complete the whole process of the measuring, scribing and cutting with the six axises linkage.It reduces the requirements of the worker`s operation skills.

• Curved plate don`t need strict orientation.

Technical parameters 

Cutting Robot

Cutting Robot,Automatic Cutting Robot,Cutting Coordinate Linear Robot,Industrial Cutting Robot

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , http://www.longxuanmachine.com