With the strong support of the government, all localities have resorted to LEDs, and the country has been booming over the waves, making the LED production areas bloom everywhere. In addition to LED leading enterprises continue to increase investment, listing financing has become an urgent need for LED enterprises. The folk power also entered a desire to share a piece of it. LED has become one of the most favored industries for venture capital and private equity investment. Only Wu Shenjun and his leading Jinshajiang Venture Capital have invested in 8 LED companies. However, in addition to the LED backlighting application in 2010, which penetrated the market faster than the industry expected, and brought a short-term prosperity to the LED market, the demand for LED backlights began to weaken last year, prompting LED companies to adjust the product structure, and gradually turn LED backlights into LED lighting. . However, all walks of life have attacked the LED lighting industry, and the investment in the hot market has not been as good as expected. In March of this year, after the LED industry experienced a period of suffering, the lighting market finally became more and more hot, and it seems that there are signs of recovery. A few days ago, the Shenzhen LED Industry Association survey showed that the LED market was significantly better in March, and the orders for major packaging, backlight applications, display applications, and lighting applications were full, and the strong demand in the middle and lower reaches also effectively boosted the upstream supporting materials. increase. Some netizens also pointed out: Compared with 2010, there are basically no LEDs in Kunming traditional stores. Now 80 stores have LED samples. Only these bosses accept LEDs and think that LEDs are more objective than traditional lamps. LED lighting is Can rise. Looking at this year, LED lighting has already had a return to the heating image. Our company has done two major indoor lighting energy-saving renovation projects this year. According to industry insiders, the recent policy support information has brought hope to domestic LED lighting companies. The rise in Taiwan's electricity prices has also brought a large number of orders to Taiwanese companies. The government and the public are paying more and more attention to energy-saving and environmentally-friendly LED lighting products. The lighting market demand is picking up, and the problem of oversupply is gradually alleviated. Despite the twists and turns in the bidding for financial subsidies initiated by the three ministries and commissions for LED products, there are also different disputes between enterprises at all levels. If government procurement is liberalized, it will indeed have a great impact on domestic enterprises. The protection, the vast majority of enterprises in the industry reshuffle will also be small and medium-sized private enterprises. But no matter who the final flower is, for the entire LED industry, it will stimulate the terminal application market and drive the domestic LED industry to pick up. However, it is undeniable that LED costs are getting lower and lower and competition will be bigger and bigger. Guangya senior commentator Liu Jun told reporters that a few days ago, some old-fashioned traditional lighting companies discovered that the engineering and channel shipments of LED lamps are very large, which also shows that the demand for LED lamps in the terminal market is very rigid. From the just-concluded Frankfurt exhibition in Germany, major companies are competing to showcase LED lighting. The global development of LED lighting is unstoppable, which will inevitably affect the end consumer market. More and more consumers will accept and start using LED lighting. Products, from this, this also reflects the market will have a reversal trend, is good news. Li Xiaoyi, senior vice president of BOE, pointed out that the trend of lighting to LED changes is now irreversible, and it will definitely bring a revolution in the field of lighting, just like digital phones replace analog phones, and digital cameras replace film cameras. At that time, energy-saving lamps were widely used in China for about 15 years, and LEDs would not take so long. Of course, this must ensure that the relevant national policies cannot follow the old path of energy-saving lamps, and the policies must be clear, continuous and complementary. As a barometer of the global lighting industry, the Guangzhou International Lighting Exhibition data also shows this sign. According to Hu Zhongshun, the world's top 500 and dozens of well-known listed companies in China have robbed large booths to prepare for the industry recovery. He believes that once the domestic LED lighting subsidy policy is implemented, it will have a policy guiding role, thereby directly stimulating consumption and cultivating the market. In addition, the subsidy policy will involve product standards and will play a catalytic role in regulating the Chinese LED market. Due to the low concentration of the lighting industry itself, energy-saving lighting and related new energy fields will usher in new development opportunities.
Polyethylene floater excellent toughness linear medium density polyethylene resin as raw materials, combined with corrosion-resistant, anti-aging and other materials, after Rotational molding, filled with high-strength polyurethane foam blowing process to produce the product, reasonable structure, excellent performance. As the water floating material mud tubes become traditional Steel Pontoon alternative products, also add UV resin material, rich enough toughness, hardness to withstand natural environmental changes and low invasion, will not pollute the water, and recyclable recycling , forming a seamless whole floating body.
Photo of our Marine Float:
General
The hull of MDPE floater is made from medium density polyethylene of excellent flexibility, filled with high strength polyurethane foam inside. With reasonable structure and good performance, the MDPE floater becomes the best substitution of the traditional steel floater for the Floating Dredging Pipe. It is widely used as floater in offshore dredging working and oil area.
The construction is to be built according to the drawing with rules of good workmanship.
The floating body is equipped with shock and wave resistance, compact and reasonable structure, easy installation and excellent performance. Being floating materials for mud delivery pipeline on water, it becomes the first choice of dredging customers.
Good Toughness, strong environmental stress cracking resistance, and being appropriate for offshore and lake construction.
Light weight, good wind and wave resistance, wear resistance, impact resistance, corrosion resistance
Easy, fast and flexible assembling diversified modeling.
Low price and cost performance is significantly better than that of steel buoy.
Light weight, big Buoyancy.
Very low absorption rate
Simple installation and low maintenance costs
Service temperature range-60°C-80°C
Main particulars
|
|
MAIN PARTICULARS
|
|
Tolerance
|
High accuracy, normal
Length: 1 %, Diameter: ±1%, Thickness: ±1mm, Weight: ±2%
|
|
Material
|
PE or Polyurethane
|
|
Dimension(L*B*H)
|
As per drawing
|
|
Out diameter
|
500-2200mm
|
|
Plastic Thickness
|
7-16mm
|
|
Length
|
600-2500mm
|
|
Buoyancy force
|
200KG-9000KG
|
|
Marking
|
as per clients' requirements
|
|
Inspection
|
material, construction, dimension, surface
|
|
Surface
|
smooth and homogeneous, bright color
|
|
Others
|
Recyclable, in line with environmental requirements and standards, and reliable
|
Polyethylene plastic float features:
1, anti-wave impact of the floating body, compact structure, easy installation, excellent performance, as water pipelines floating mud material become lost customers preferred product of sediment discharge.
2, toughness, resistance to environmental stress cracking resistance, suitable for the construction of sea and lake.
3, light weight, wear resistance, ease of installation and handling, low transportation costs transfer.
4, corrosion resistance, weather resistance, long life, is three times that of steel pontoon life.
5, the assembly is simple, fast, flexible, shape and diverse.
6, low price, the price was better than steel buoys.
7, because of stable quality, innovative design, reasonable price and good service, welcomed by users.
Polyethylene float performance characteristics:
a, light weight, buoyancy
b, impact resistance, acid and other corrosive
c, absorption rate
d, simple construction and low maintenance costs
e, temperature range -60-80 ℃
Use polyethylene float: mainly used in ocean, salt, fish farming, underwater oil, dredging duct laying.
Polyethylene float features:
a, to ensure the delivery line of water float.
b, orange exterior color can be used as warning signs to prevent the strike line.
c, convenient transportation pipeline inspection and maintenance.
d, shorten the construction period, reduce costs, reduce maintenance costs.
Marine Float
Rubber Water Hose,Flexible Rubber Hose,Steel Marine Floating,Marine Floating Hose
Unisite Group Ltd. , http://www.shipsparts.nl