Progress phase: Preliminary design and construction period: 2011 - 2012 Major equipment: firefighting facilities, security facilities, water supply and drainage facilities, electrical facilities, building facilities, etc.
Project Description:
The project is located at No. 52, Dinghai Road, Lianzhou Town, Hepu County, Guangxi Zhuang Autonomous Region. It covers an area of ​​1,000 square meters and a building area of ​​8,000 square meters.
The total investment of the project is RMB 30 million.
Construction Unit: Hepu Power Supply Company Postal address: No. 30, Huizhu Avenue, Lianzhou Town, Hepu County, Guangxi Zip Code: 536100
Contact: Du Gong Phone
4. Project Name: Golden Hulu Garden Residential Project 2011-04-15
Progress phase: Environmental impact assessment construction period: July 2011 - July 2014 Major equipment: fire-fighting facilities, security facilities, water supply and drainage facilities, electrical facilities, construction facilities, etc.
Project Description:
The project is located in Zhuoying New District, Dewuming County, central and southern Guangxi Province. It is adjacent to No. 1 Road (Weiyi Road) of the Zhuying New District on the north, No. 3 Road (Jingwu Road) of the Zhuying New District on the south, and No. 10 Road of the Biaoying New District on the east. No. 6 of the new project zone is located in the south and passes through the residential area. The project site is roughly square, about 326 meters long from east to west, and about 311 meters deep from north to south. The site is relatively flat, with abundant natural resources and good landscape. The project has a building area of ​​210,000 square meters and the land is divided into two blocks, namely North and South. There is No. 6 road in the No. 4 Division of Yingying New District divided into two. The total land area is approximately 100,000 square meters, the net land area is approximately 91,319 square meters, the total construction area is approximately 237,228.73 square meters, the floor area ratio is 2.3, the building density is 25.05%, and the greening rate is 35.05%. The project will be mainly residential, and it will also be equipped with commercial facilities such as shops, clubs, property management, and kindergartens. The project area is designed to provide 1608 households with various types of residential houses.
The total investment of the project is 400 million yuan.
Construction Unit: Wuming County Fuming City Investment Development Co., Ltd. Postal address: No. 245, Chengxingwu Avenue, Wuming County Post Code: 530100
Contact: Chen Gong Tel: 0771--5556624
Design institute: Coal Research Institute Hangzhou Environmental Protection Research Institute (EIA)
Postal address: No.288 Gongxiu Road, Xiaoshan District, Hangzhou, China: 311201
Contact: Wang Gong Tel: 0771-5842139
Fax: 0771-5842139
Oxide powder for thermal spray refers to a type of powder material that is used in thermal spray processes. Thermal spray is a coating technique where a material in powder form is heated and propelled onto a substrate, forming a coating.
Oxide powders are commonly used in thermal spray applications due to their high melting points, excellent wear resistance, and thermal insulation properties. They can be used to create protective coatings on various surfaces, such as metals, ceramics, and plastics.
Some common types of oxide powders used in thermal spray include:
1. Aluminum oxide (Al2O3): This oxide powder is widely used for its high hardness, wear resistance, and thermal insulation properties. It is commonly used for coating applications in industries such as aerospace, automotive, and electronics.
2. Zirconium oxide (ZrO2): Zirconium oxide powder is known for its high melting point and excellent thermal barrier properties. It is often used in thermal spray coatings for gas turbine engine components, where thermal insulation is critical.
3. Chromium oxide (Cr2O3): Chromium oxide powder is used for its high hardness, corrosion resistance, and wear resistance. It is commonly used in applications where high temperature and abrasive wear resistance are required.
4. Titanium oxide (TiO2): Titanium oxide powder is known for its high refractive index and excellent UV resistance. It is often used in thermal spray coatings for optical and decorative applications.
These oxide powders can be applied using various thermal spray techniques, such as flame spraying, plasma spraying, or high-velocity oxy-fuel (HVOF) spraying. The choice of oxide powder and thermal spray technique depends on the specific application requirements and desired coating properties.
Oxide Ceramics Powder,Pure Aluminum Oxide Powder,Chromium Oxide Ceramics Powder,Yttria Stabilized Zirconia Powder
Luoyang Golden Egret Geotools Co., Ltd , https://www.xtcalloypowder.com