Model NO.: FP4
Fin Material: Copper, Aluminium, Steel, Stainless Steel Be Viabl
Design Serice: Be Viable
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0MPa
Structure: Tube Fin Heat Exchanger
Structure Material: Metal Material
Core: Aluminum Heat Exchanger
Trademark: shenglin
Transport Package: Customerized Packing
Specification: CE, ISO
Origin: Shanghai, China
HS Code: 8415909000
Model NO.: FP4
Fin Material: Copper, Aluminium, Steel, Stainless Steel Be Viabl
Design Serice: Be Viable
Fin Thickness: 0.105mm-0.4mm
Liquid Flow Rate: 2.5m/S
Tube Type: Smooth Tube, Thread Tube
Maximum Working Pressure: 3.0MPa
Structure: Tube Fin Heat Exchanger
Structure Material: Metal Material
Core: Aluminum Heat Exchanger
Trademark: shenglin
Transport Package: Customerized Packing
Specification: CE, ISO
Origin: Shanghai, China
HS Code: 8415909000
Brief description:1. Heat exchangers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.
The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.
Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
| Fin Pattern | Copper Tube O. D. (mm) | Row Space(mm) | Hole Space(mm) | Fin Thickness(mm) Â |
Fin Space(mm) | ||||
| Flat fin | Sine wave with blade fin | Smooth sine wave fin | Window fin | Sesamoid fin | |||||
| A | 7 | 12.7 | 21 | 0.105 | / | / | 1.3 | 1.3 | / |
| B | 7 | 13.2 | 17.6 | 0.105 | / | / | 1.3 | 1.3 | / |
| C | 7 | 12.7 | 20.4 | 0.105 | / | / | 1.3~1.8 | 1.3~1.8 | / |
| D | 7.94 | 15.88 | 25.4 | 0.105 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | / |
| E | 9.52 | 22 | 25.4 | 0.105~0.15 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| F | 9.52 | 22 | 25.4 | 0.18~0.4 | 3.5~6.35 | / | / | / | / |
| G | 9.52 | 21.65 | 25 | 0.105~0.18 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| H | 9.52 | 21.65 | 25 | 0.15~0.24 | 3.2~6.35 | 3.2~6.35 | 3.2~6.35 | / | / |
| I | 12.75 | 27.5 | 31.75 | 0.115~0.15 Â |
1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.6~3.2 |
| J | 15.88 | 33 | 38.1 | 0.115~0.15 | 1.5~4.0 | 1.5~4.0 | 1.5~4.0 | / | / |
| K | 15.88 | 34.64 | 40 | 0.115~0.15 | / | 2.6~3.5 | 2.6~3.5 | / | / |
Features
Saving investment costs
Less space occupation
Plates can be increased or decreased flexibly as required
Convenient maintenance
Light weight
Â
Fin type
| Type | Fin Type | Height mm | Pitch mm | Thickness mm |
| Lover | Out fin | 8 | 2.0/2.5/3.0 | 0.1/0.15/0.2 |
| 9 | ||||
| 9.5 | ||||
| 10.3 | ||||
| 11.3 | ||||
| 12 | ||||
| Sawtooth | Inner fin | 2.5 | 1.4/1.7/2.0/2.5/3.0 | 0.15/0.2/0.25/0.3 |
| 3 | ||||
| 4.7 | ||||
| 6.5 | ||||
| 7.24 |
Technical Data
Â
| INTERCOOLER : | ||||
| Picture | Item NO. | Application | CORE SIZE | Inlet/ Outlet Pipe Dia. |
| Â | B9059B | UNIVERSAL IC:600*300*76 (Bar and plate type) | 600*300*76MM | 3" |
| Â | JLZL001 | UNIVERSAL IC (tube and fin type) IC:600*300*76 | 600*300*76MM | 3" |
| Â | B9382 | UNIVERSAL IC:600*300*100 | 600*300*100MM | 3" |
| Â | B9952 | UNIVERSAL IC:550*140*65 | 550*140*65MM | 2.25" |
| Â | B9954 | UNIVERSAL TYPE IC:550*180*65 | 550*180*65MM | 2.25" |
| Â | B9453 | UNIVERSAL TYPE INTERCOOLER:300*280*76 | 300*280*76MM | 3" |
| Â | B9955 | UNIVERSAL TYPE IC:550*230*65 | 550*230*65MM | 2.25" |
| Â | B91094 | UNIVERSAL IC IC:450*300*76 | 450*300*76MM | 3" |
| Â | B9112 | HONDA CIVIC 88-2000 FMIC:460*160*90 | 460*160*90 MM | 2.5" |
| Â | B9055 | TOYOTA MR2 SW20 90-95 IC:240*195*100 | 240*195*100 MM | 2.5" |
| Â | B9046 | NISSAN R32/R33/R34 GTR IC 600*295*120 | 600*295*120MM | 3.25" |
| Â | B9770 | Actyon, Kyron, Rexton 2 IC 600*240*75 | 600*240*75MM | 2.5" |
| Â | B9034 | MITSUBISHI DSM 2ND GEN 95-99 4G63 IC:720*260*90 | 720*260*90MM | 2.5" |
| Â | B9044 | MITSUBISHI DSM 1ST GEN 90-94 4G63 IC:600*295*76 | 600*295*76MM | 2.5" |
| Â | B9019 | MITSUBISHI EVO VIII 2003+ IC:500*315*90 | 500*315*90MM | 2.5 |
| Â | B9027 | MAZDA 13B ROTARY RX7 S4 FC3S SMIC:320*300*80 | 320*300*80MM | 2.75" |
| Â | B9033 | SUBARU WRX(02-06) FMIC:650*235*90 | 650*235*90MM | 2.5" |
| Â | B9051 | SUBARU WRX GC8 TMIC:510*200*100 | 510*200*100MM | 2.75" |
| Â | B9251 | FORD 8588 (XR4T1)IC+RT COMBO | 640*310*50MM | Â |
| Â | B9045 | FORD RS500 COSWORTH INTERCOOLER:600*400*45 | 600*400*45MM | 3" |
| Â | B9036 | Ford Mustang IC | 610*115*90MM | 3.5"/2.1*2 |
| Â | B9035 | Dodge NEON SRT-4 IC | 610*300*100MM | 2.5"/2.5" |
| Â | B9132 | BUICK GRAND NATIONAL IC:575*160*76 | 575*160*76MM | 2.5 |
| Â | B9056 | WATER TO AIR IC IC:260*115*110 | 260*115*110MM | 3" |
| Â | B9479 | WATER TO AIR IC IC:115*230*270 | 115*230*270MM | 3.5" |
| Â | B91095 | WATER TO AIR IC IC:220*250*115 | 220*250*115MM | 3.5" |
| Â | B91188 | UNIVERSAL TYPE IC:350*300*76 | 350*300*76MM | Â |
MOQ:20pcs for each codeÂ
We also do customization,please send us special requirements,thank you!Â
Â
Application
Applied fields:
Agricultural machines, tractors and forestry equipment
Construction machines
Automotive industry
Railway equipment (trains)
Compressors
Hydraulic installations
Power generator sets (gen-sets)
Contact me
Ruby Yang
Mobile: +86 15538183231
Â
 Brief description:
1. Heat exchangers
2. Can be customerized
3. Work Pressure: 0.2~3.1MPa
4. Fin space: 1.2~3.5mm
5. Tube Diameter: 7, 9.52, 12.7, 16mm.
The technology to create perfection:
1. The fins produced are of vry high standard of quality having flare position made of plain,
Wave type.
2. The edge of fins can be straight or ripple depending upon application.
3. All the coils are 100% tested for leakages and passed through the heating oven with ht air circulation for inside and ourtside cleaning and charged nitrogen.
4. The mechanical bullet expansion of copper tube to fin ensures efficient heat transfer of co-densers and evaporators.
5. The row material of excellence: We source only the best quality raw material from aroud the world, , to manufacture heat exchangers that are of globally acceptable standards.
6. Plain copper pipe of 7mm, 7.94mm, 9.52mm and 12.75mm diameter.
7. Aluminum foil in blu color with hydrophilic and bio(Health) properties.
Features:
1. Material: Copper, aluminum, galvanized plate
2. Aluminum foil: Hydrophilic or bare
3. Fin type: Louver fin or flat fin or corrugated fin
4. Copper pipe: Diameter 7mm or 8mm or 9.52mmor 12.75mm or 15.888mm, grooved or smooth tube
5. Pitch of fins can be adjusted between 1.8- 5.8mm.
6. Pitch of holes and pitch of rows: 25*21.65MM and 12.7*19.05MM
7. Suitable for R134A, R22, R404A, R407C refrigerant and so on
8. Voltage: 220V/1/50Hz and 380V/3/50Hz or other type.
9. Different alternative condensing fans available: Shaded pole or outer rotor fan motor.
10. Did gas examination under 3.0Mpa air pressure to ensure the tightness.
11. Widely used in refrigeration industry, cold room and other cooling system.
12. We can supply products as per customized samples or drawing.
13. Producing procedure: Tube bending, punching fin, expanding, digressing, drying
Welding, leakage test, bending, inspection, packing
| Fin Pattern | Copper Tube O. D. (mm) | Row Space(mm) | Hole Space(mm) | Fin Thickness(mm) Â |
Fin Space(mm) | ||||
| Flat fin | Sine wave with blade fin | Smooth sine wave fin | Window fin | Sesamoid fin | |||||
| A | 7 | 12.7 | 21 | 0.105 | / | / | 1.3 | 1.3 | / |
| B | 7 | 13.2 | 17.6 | 0.105 | / | / | 1.3 | 1.3 | / |
| C | 7 | 12.7 | 20.4 | 0.105 | / | / | 1.3~1.8 | 1.3~1.8 | / |
| D | 7.94 | 15.88 | 25.4 | 0.105 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | 1.8~3.0 | / |
| E | 9.52 | 22 | 25.4 | 0.105~0.15 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| F | 9.52 | 22 | 25.4 | 0.18~0.4 | 3.5~6.35 | / | / | / | / |
| G | 9.52 | 21.65 | 25 | 0.105~0.18 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | 1.6~3.2 | / |
| H | 9.52 | 21.65 | 25 | 0.15~0.24 | 3.2~6.35 | 3.2~6.35 | 3.2~6.35 | / | / |
| I | 12.75 | 27.5 | 31.75 | 0.115~0.15 Â |
1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.5~3.5 | 1.6~3.2 |
| J | 15.88 | 33 | 38.1 | 0.115~0.15 | 1.5~4.0 | 1.5~4.0 | 1.5~4.0 | / | / |
| K | 15.88 | 34.64 | 40 | 0.115~0.15 | / | 2.6~3.5 | 2.6~3.5 | / | / |
Features
Saving investment costs
Less space occupation
Plates can be increased or decreased flexibly as required
Convenient maintenance
Light weight
Â
Fin type
| Type | Fin Type | Height mm | Pitch mm | Thickness mm |
| Lover | Out fin | 8 | 2.0/2.5/3.0 | 0.1/0.15/0.2 |
| 9 | ||||
| 9.5 | ||||
| 10.3 | ||||
| 11.3 | ||||
| 12 | ||||
| Sawtooth | Inner fin | 2.5 | 1.4/1.7/2.0/2.5/3.0 | 0.15/0.2/0.25/0.3 |
| 3 | ||||
| 4.7 | ||||
| 6.5 | ||||
| 7.24 |
Technical Data
Â
| INTERCOOLER : | ||||
| Picture | Item NO. | Application | CORE SIZE | Inlet/ Outlet Pipe Dia. |
| Â | B9059B | UNIVERSAL IC:600*300*76 (Bar and plate type) | 600*300*76MM | 3" |
| Â | JLZL001 | UNIVERSAL IC (tube and fin type) IC:600*300*76 | 600*300*76MM | 3" |
| Â | B9382 | UNIVERSAL IC:600*300*100 | 600*300*100MM | 3" |
| Â | B9952 | UNIVERSAL IC:550*140*65 | 550*140*65MM | 2.25" |
| Â | B9954 | UNIVERSAL TYPE IC:550*180*65 | 550*180*65MM | 2.25" |
| Â | B9453 | UNIVERSAL TYPE INTERCOOLER:300*280*76 | 300*280*76MM | 3" |
| Â | B9955 | UNIVERSAL TYPE IC:550*230*65 | 550*230*65MM | 2.25" |
| Â | B91094 | UNIVERSAL IC IC:450*300*76 | 450*300*76MM | 3" |
| Â | B9112 | HONDA CIVIC 88-2000 FMIC:460*160*90 | 460*160*90 MM | 2.5" |
| Â | B9055 | TOYOTA MR2 SW20 90-95 IC:240*195*100 | 240*195*100 MM | 2.5" |
| Â | B9046 | NISSAN R32/R33/R34 GTR IC 600*295*120 | 600*295*120MM | 3.25" |
| Â | B9770 | Actyon, Kyron, Rexton 2 IC 600*240*75 | 600*240*75MM | 2.5" |
| Â | B9034 | MITSUBISHI DSM 2ND GEN 95-99 4G63 IC:720*260*90 | 720*260*90MM | 2.5" |
| Â | B9044 | MITSUBISHI DSM 1ST GEN 90-94 4G63 IC:600*295*76 | 600*295*76MM | 2.5" |
| Â | B9019 | MITSUBISHI EVO VIII 2003+ IC:500*315*90 | 500*315*90MM | 2.5 |
| Â | B9027 | MAZDA 13B ROTARY RX7 S4 FC3S SMIC:320*300*80 | 320*300*80MM | 2.75" |
| Â | B9033 | SUBARU WRX(02-06) FMIC:650*235*90 | 650*235*90MM | 2.5" |
| Â | B9051 | SUBARU WRX GC8 TMIC:510*200*100 | 510*200*100MM | 2.75" |
| Â | B9251 | FORD 8588 (XR4T1)IC+RT COMBO | 640*310*50MM | Â |
| Â | B9045 | FORD RS500 COSWORTH INTERCOOLER:600*400*45 | 600*400*45MM | 3" |
| Â | B9036 | Ford Mustang IC | 610*115*90MM | 3.5"/2.1*2 |
| Â | B9035 | Dodge NEON SRT-4 IC | 610*300*100MM | 2.5"/2.5" |
| Â | B9132 | BUICK GRAND NATIONAL IC:575*160*76 | 575*160*76MM | 2.5 |
| Â | B9056 | WATER TO AIR IC IC:260*115*110 | 260*115*110MM | 3" |
| Â | B9479 | WATER TO AIR IC IC:115*230*270 | 115*230*270MM | 3.5" |
| Â | B91095 | WATER TO AIR IC IC:220*250*115 | 220*250*115MM | 3.5" |
| Â | B91188 | UNIVERSAL TYPE IC:350*300*76 | 350*300*76MM | Â |
MOQ:20pcs for each codeÂ
We also do customization,please send us special requirements,thank you!Â
Â
Application
Applied fields:
Agricultural machines, tractors and forestry equipment
Construction machines
Automotive industry
Railway equipment (trains)
Compressors
Hydraulic installations
Power generator sets (gen-sets)
Contact me
Ruby Yang
Mobile: +86 15538183231
Â
Â
Dust filter cages construction typically consist of 10, 12 or 20 longitudinal wires. The horizontal ring spacing on cages can be 4″, 6″ or 8″. If plenum height restrictions are a problem, two piece cages are available in popular 'twist-lock' or 'fingers' styles. For areas where moisture or acid corrosion present we can provide a range of materials, often galvanized steel or stainless steel. Top load filter cages are available with a T-flange, ring top or several styles of rolled flange tops. Cage diameters range from 4″ to 6 1/8″. Wire thickness ranges are 9 gauge, 10 gauge and 11 gauge. Cages for bottom load baghouses are constructed with a split collar or split ring top. Cage diameters range from 4″ to 6 1/8″. Wire thickness ranges are 9 gauge, 10 gauge and 11 gauge. For more efficient cleaning, Venturi are available for all diameter cages. Venturi comes in 3″ to 6″ lengths. Venturi are made in a variety of materials including aluminum, carbon steel, galvanized and stainless steel. Our dust collector cages can be made to fit existing collectors from any baghouse manufactures such as Astek, Gencor, Flexkleen, Mikropul, Wheelabrator, etc. We can also manufacture uncommon and specialized cage designs as required
Baghouse Cages,Filter Bag Cage,Baghouse Filter Cages,Dust Collector Filter Cage
Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com