1. Universal tool grinder machine bolts are securely fixed and kept upright, and shall not be overturned. The road should be clean and tidy, safe and unimpeded, ventilated, and well lit. The power cord must not be intertwined with each other, and should be kept away from places where high temperatures and oil can be easily damaged.
2. Before starting the universal tool grinder machine, please read the machine manual carefully, familiar with the machine structure, the handle function, the drive lubrication system and the safe operation specification before operating this machine.
3. The universal power tool grinder machine power plug, socket installation should be solid and reliable, good contact, non-electrical professional machine tool power plug is prohibited, non-professionals are prohibited to install and repair the machine's electrical system.
4. Before starting the machine, check that the voltage and frequency of the power supply are consistent with the motor nameplate requirements.
5. Before starting the machine tool, check the reliability of the protective grounding of the electrical system; check the reliability of the protective earthing of the electrical system before the bed.
6. The handle that should be locked in the universal tool grinding machine must be locked before work. The workpiece should be reliably clamped. Before starting the machine tool, the workpiece should be reliably clamped. Before starting the machine tool, the wheel guard should be fixed and the tools such as the wrench left on the machine should be removed. The wheel guard should be fixed and the tools such as the wrench left on the machine should be removed.
7. Do not wear gloves and be careful not to touch the rotating grinding wheel or workpiece by hand to avoid injury.
8. It is forbidden to install the workpiece and replace the grinding wheel on the universal tool grinder machine that is started.
9. When operating the machine tool, employees should pay attention to protecting their hands, eyes and face. Wear protective goggles, caps and other protective equipment as required. Long hair should be plated into the cap and long sleeves rolled up above the elbow.
10. Before the maintenance and repair of the machine tool, be sure to cut off the machine power supply, confirm the safety, before entering the maintenance and repair of the machine, must first cut off the machine power, confirm the safety, and then operate.
11.Before turning on the power, make sure that the machine switch is in the off position. Before completing the work or leaving temporarily, make sure that the machine switch is in the off position before turning on the power. When the work is finished or temporarily left, please turn off the machine. Power switch; please turn off the machine power switch.
12. Universal tool grinder machine failure and abnormal sound in the work, should immediately cut off the machine power supply, check the reason, the machine tool in the work of failure and abnormal sound, should immediately cut off the power of the machine, check the causes, troubleshooting, Fang The machine can be restarted.
13. Be vigilant when working. It is forbidden to operate the machine after drinking and fatigue.
CAR WASHER PARTS,Plunger Pump PARTS
accessory
ZHEJIANG BOTUOLINI MECHANICAL CO.,LTD , http://www.botuopump.com