In the field of agricultural research, in order to observe the seed growth and development process, the experimenter applied equipment capable of simulating various microclimate environments to the experiment in order to provide a reliable environmental basis for the development of the research. Among them, the light incubator is a very common one in these environmental simulation equipments, because its application allows the experimenter to only need to move the finger, so that the experimental lighting, experimental temperature and experimental time can be controlled, which is conducive to the normal development of the research work. And efficient expansion.
From the point of view of the performance and characteristics of most of the light incubators on the market today, the light incubator is basically composed of a sample test chamber, a light source system device, a temperature adjustment and humidity control device, and other auxiliary devices, and Topp YunNong is The performance of the light incubator is more clear and the operation is more user-friendly. The liquid crystal display and the control panel are added, allowing the user to easily control the environmental conditions in the cabinet. When using the light incubator to control the experimental light intensity, the user only needs to Do the following:
1. Turn on the power. After the power is turned on, close the power switch and keep the power on. The power indicator in the switch is on.
2 settings and conditions of light intensity, light settings can refer to the manual operation, by clicking on the control panel to set the query key, reduce key, increase key to achieve adjustment of light settings, to achieve light intensity adjustment to meet different The light intensity of the test is required. In this process, if lighting is needed, the light switch can be turned on.
3. The incubator has a break point protection function and a delay time of about one and a half minutes. Once the compressor is stopped, it will take about one and a half minutes to start again.
With these three points, it is not difficult to control the experimental light intensity. On the whole, it can be found that the entire light intensity control work just needs to move the finger only, which is very convenient and simple. Therefore, in the modern agricultural production research work, vigorously promoting the use of top cloud incubator lighting incubator is a major help to promote agricultural technological progress.
Cable Tray Roll Forming Machine is more and more improtant.
Hangzhou Yibo Machinery Co.,Ltd, founded in 2003 is an professional machinery manufacturer for design, produce, service and trade.
Yibo's main products are Cold Roll Forming Machine, such as purlin Forming Machine , guardrail forming machine, roof panel forming machine, wall panel forming machine, tile forming machine, floor Deck Forming Machine, Roof Seaming Machine and so on; steel coil process machinery such as Slitting Line , Cut to Length Line , combined line and so on; accessory Stamping Parts such as roof supporting clips, connect bar, water bar and so on.
Cable Tray Roll Forming Machine
Cable Tray Roll Forming Machine,Cable Tray Machine,Cable Tray Production Line
HANGZHOU IUWON TECHNOLOGY CO,. LTD. , https://www.iuwon.com