1. Thickness: 0.075-1.0mm
2. Width: 1000mm, 1200mm, 1250mm, 4000mm
3. Color: Brown, black, white
We use best imported Fiberglass as the weaving material to plain knit or specially knit into superior fiberglass basic cloth, coat it with fine PTFE resin then make it into various PTFE Teflon high temperature resistance cloth in different thickness and widths.
Features:
Stable dimension, high intensity, elongation coefficient less 0.5%
Good temperature resistance, 24 hours working temperature -70-260degC
Low coefficient of friction and dielectric constant, good insulating ability
Non stick, easy to clear stains and adhesives on the surface
Good chemical resistance, it can resist all most of chemical medicines, acids, alkalis, and salt, it is fireproof, lower in aging.
Application:
Used as various of liners to resist high temperature, such as microwave liner, oven liner, or other liners.
Used as non stick liners, intermediate
Used as various conveyor belts, fusing belts, sealing belts or anywhere need resisting high temperature, non stick, chemical resistance etc.
Used as covering or wrapping material in petroleum, chemical industries, as wrapping material, insulating material, high temperature resistance material in electrical industries, desulfurizing material in power plant etc.
Item No. Â | Color | Thickness(mm) | Max Width(mm) | Weight(g/sqm) | Tensile Strength(N/cm) | Temperature Resistance(C) |
|
Warp | Weft | ||||||
9008AJ | Brown | 0.076 | 1250 | 160 | 130 | 120 | -70~260 |
9008BJ | Black | 0.076 | 1250 | 160 | 130 | 120 | -70~260 |
9008Y | Black | 0.08 | 1250 | 170 | 130 | 120 | -70~260 |
9013AJ | Brown | 0.127 | 1250 | 255 | 220 | 190 | -70~260 |
9013BJ | Black | 0.127 | 1250 | 255 | 220 | 190 | -70~260 |
9013Y | Black | 0.13 | 1250 | 260 | 220 | 190 | -70~260 |
9018AJ | Brown | 0.18 | 1250 | Â 380 | Â 330 | 250Â | -70~260 |
9018BJ | Black | 0.18 | 1250 |  415 |  330 | 250 | -70~260 |
9025AJ |  Brown | 0.25 | 1250 |  490 |  410 | 330 | -70~260 |
9025BJ | Black | 0.25 | 1250 |  510 |  410 |  330 | -70~260 |
9025AK |  Brown  | 0.23 |  2600 |  480 |   410 |  330 | -70~260 |
9025BK | Black | 0.23 | Â 2600 | Â 480 | Â Â 410 | Â 330 | -70~260 |
9030AJ | Brown | 0.30 |  2600 |  630 |  560 | 445 | -70~260 |
9030BJÂ | Black | 0.30 | Â 2600 | Â 630 | Â 560 | Â 445 | -70~260 |
9035AJ | Brown | 0.34 |  1250 | 660 |  560 |  445 | -70~260 |
9035BJ | Black | 0.34 |  1250 | 680 |  560 |  445 | -70~260 |
9036AJ | White | 0.36 | Â 2950 | Â 780 | 820Â | Â 500 | -70~260 |
9036BJ | Black | 0.36 | Â 2950Â | Â 820 | 820Â | 500Â | -70~260 |
9060AJ | White | 0.60 |  2950 |  1150 |  1080 | 750 | -70~260 |
9090AJ | Brown | 0.90 |  2950 | 1700 |  1500 |  1250 | -70~260 |
9090BJ | Black | 0.90 |  2950 |  1700 |  1500 |  1250 | -70~260 |
Someone may not clear that it would change the time, resulting in poor engine performance even damage to valves, if the teeth on the belt jump over the teeth of gear. So that`s why Tensioner Bearing exists. It keeps belt tension never be too low or too high.
The tensioner Bearing should be replaced when replacing the timing belt. And we are professional for the United States, Europe, Japan and other countries, to provide high quality and affordable tension bearing.
belt Idler Pulleys are provided with a series of radial reinforcing ribs to prevent deformation caused by the wedging action of the belt.
The Timing Belt Tensioner is used to keep tension on the timing belt. The timing belt is a rubber belt that runs over and through a series of pulleys and gears. Over time, due to age and heat, the belt will stretch out. As the belt stretches it can become loose, so the tensioner needs to adjust the belt as needed to keep it tight.
Tensioner Bearing
Tensioner Bearing,High Strength Tensioner Bearing,Tensioner Roller Bearing,Belt Idler Pulley,Timing Belt Tensioner
NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com