Kl6014 Series 3/2 Way 220 Volt Water Control Solenoid Valve

Description of goods: 
Low price 3 way solenoid valve for water KL6014

1. Sub-base connection or thread
2. Size 1/8", 1/4"
3. Voltage: DC AC
4. Fluid: Air, water, hot water, oil
5. Valve body material: Brass

Technical data:
If you can not find the proper model, you can contact with me.


Ningbo Kailing Pneumatic Co., Ltd.                                                            

(formerly named Fenghua Kailing Pneumatic Co.,ltd.) is a leading Chinese company specializing in the

manufacture of solenoid valves and pneumatic components. We are a key member China of Pneumatic

Association, and is awarded AAA Credit Grade by Bank of China.                                                                   

High quality of the raw materials, the precision of the parts, the hard tests during and at the end of

production are a warranty of reliability and features. Our real strength is to develop customised products

to solve any requirement of utilisation. The production runs conforming to the rigorous ISO 9001/2000

requirements .The product range consists of solenoid valves, process valves,Air source treatment units

etc ,which are found in a variety of industrial applications such as machinery, metallurgy, food, textile and
                                                                                                                                      
waste treatment. Description of goods: 
Low price 3 way solenoid valve for water KL6014

1. Sub-base connection or thread
2. Size 1/8", 1/4"
3. Voltage: DC AC
4. Fluid: Air, water, hot water, oil
5. Valve body material: Brass

Technical data:
If you can not find the proper model, you can contact with me.


Ningbo Kailing Pneumatic Co., Ltd.                                                            

(formerly named Fenghua Kailing Pneumatic Co.,ltd.) is a leading Chinese company specializing in the

manufacture of solenoid valves and pneumatic components. We are a key member China of Pneumatic

Association, and is awarded AAA Credit Grade by Bank of China.                                                                   

High quality of the raw materials, the precision of the parts, the hard tests during and at the end of

production are a warranty of reliability and features. Our real strength is to develop customised products

to solve any requirement of utilisation. The production runs conforming to the rigorous ISO 9001/2000

requirements .The product range consists of solenoid valves, process valves,Air source treatment units

etc ,which are found in a variety of industrial applications such as machinery, metallurgy, food, textile and
                                                                                                                                      
waste treatment.

Timing Gear

Types
Gear or chain systems are also used to connect the crankshaft to the camshaft at the correct timing. However, gears and shafts constrain the relative location of the crankshaft and camshafts. Even where the crankshaft and camshaft (s) are very close together, as in pushrod engines, most engine designers use a short chain drive rather than a direct gear drive. This is because gear drives suffer from frequent torque reversal as the cam profiles "kick back" against the drive from the crank, leading to excessive noise and wear. Fiber or nylon covered gears, with more resilience, are often used instead of steel gears where direct drive is used. Commercial engines and aircraft engines use steel gears only, as a fiber or nylon coated gear can fail suddenly and without warning. 

A belt or chain allows much more flexibility in the relative locations of the crankshaft and camshafts.

While chains and gears may be more durable, rubber composite belts are quieter in their operation (in most modern engines the noise difference is negligible), are less expensive and more efficient, by dint of being lighter, when compared with a gear or chain system . Also, timing belts do not require lubrication, which is essential with a timing chain or gears. A timing belt is a specific application of a synchronous belt used to transmit rotational power synchronously.

Timing belts are typically covered by metal or polymer timing belt covers which require removal for inspection or replacement. Engine manufacturers recommend replacement at specific intervals.   The manufacturer may also recommend the replacement of other parts, such as the Water Pump, when the timing belt is replaced because the additional cost to replace the water pump is negligible compared to the cost of accessing the timing belt. In an interference engine, or one whose valves extend into the path of the piston, failure of the timing belt (or timing chain) invariably results in costly and, in some cases, irreparable engine damage, as some valves will be held open when they should not be and thus will be struck by the pistons.

Indicators that the timing chain may need to be replaced include a rattling noise from the front of the engine.

Timing Gear

Timing Gear,Car Timing Gear,Aluminum Engine Part,Aluminum Mold Engine Parts

Ningbo Jinyao Machinery Company. LTD , https://www.cardiecastingmold.com