Recently, Hitachi Metals announced its development plan in the United States. The company will invest 2 billion yen (about 25.71 million US dollars) to build a new plant in the United States to produce neodymium magnets for use in electric vehicles and hybrid vehicles.
According to reports, Nd-Fe-B (Strontium-Iron-Boron) sintered magnets are indispensable components for hybrid and electric vehicle drive motors. Compared to other magnets, neodymium magnets not only have strong magnetic forces, they can achieve high power enough to drive the vehicle, and they can also reduce the size of the motor.
With strict environmental protection regulations and rising crude oil prices, many factors have promoted the growth of demand for neodymium magnets for electric vehicles in the United States and Europe. With the new plant in the United States, Hitachi Metals will be able to meet the US and even North America and Europe as a whole. The growing demand for neodymium magnets in the market.
The construction of Hitachi’s new US plant is expected to begin in January 2012. Production will begin in April 2013. It will mainly produce neodymium magnets. After the plant enters large-scale production, its monthly production capacity will reach 40 tons.
About the Metal Products Association <br> Hitachi Metals Co., Ltd. was established in 1956 (Showa 31) and its headquarters is located in Shibaura Ichi, Minato-ku, Tokyo. Hitachi Metal Co., Ltd. has developed products covering electronics, automotive, machinery, construction, and environmental fields such as IT parts and materials, magnetic application parts, flat panel displays, computers and semiconductor integrated circuit devices, automotive parts and materials, and environmental protection systems. Products, aerospace and nuclear power industrial materials, etc.
Aws E6011 Welding Electrodes
AWS E6011 Welding Electrodes is a high cellulose potassium type welding electrode for carbon steel. It is specially suitable for vertical-down welding.Both AC and DC can be applied and it shows a fine appearance with highwelding efficiency.
Product details:
Diameter: 2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm
Length: 300mm, 350mm, 400mm, 450mm
Operating Current: AC and DC
Welding Current Range:60-160A
Application:
AWS E6011 Welding Electrodes that is suitable for butt,fillet and lap welding for thin plates structures,such as smoke pipes,wind pipes, oil tanks of tranformer, outside cover of vehicles,etc.
Attention:
1.AWS E6011 Carbon Steel Welding Electrodes should be baked at the temperature of 350℃ for one hour before welding.
2. Before welding, the weld metal must be cleared away impurities, such as rust, oil, moisture, etc.
3.Short arc and narrow weld bead are recommended in welding.
Packing of AWS E6011 Welding Electrodes
2.5mm*300mm 2.5kgs/inner box, 8inner boxes/carton=20kgs
3.2mm*350mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
4.0mm*400mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
5.0mm*400mm 5.0kgs/inner box, 4inner boxes/carton=20kgs
AWS E6011 Welding Electrodes
Aws E6011 Welding Electrodes,4.0Mm Welding Electrode,E6011 Welding Electrodes,2.5Mm Welding Electrode
Dingzhou Jinlong Metal Production Co., Ltd. , http://www.weldingelectrodefactory.com