Epoxy Resin Vacuum Casting Machine

Model NO.: custom made
Automatic Grade: Automatic
Condition: New
Customized: Customized
Warranty: 12 Months
Vacuum Pump: Busch, German
Trademark: HAOSHUO
Transport Package: Seaworthy Packing
Specification: customized
Origin: Jiangsu, China
HS Code: 84774090
Epoxy Resin Vacuum Casting Machine

1 Main component of the machine
1.1, Resin mixing & degassing system...1 set
1.2, Hardener mixing & degassing system...1 set
1.3, Electronic scale system...1 set
1.4, Final material mixing system...1 set
1.5, Vacuum casting tank system...1 set
1.6, Heating system...4 sets
1.7, Vacuum pump system...2 sets
1.8, Pneumatic pipeline system...1 set
1.9, Cooling water pipeline system...1 set
1.10, Material feeding system...1 set
1.11, Electrical controlling system...1 set

2, Equipment technical index and parameter
2.1, Casting tank size: As per customer request
2.2, Main pump speed: 300LS
2.3, Casting tank working temperature: 70~85° C
2.4, Casting tank limiting vacuum: ≤ 30Pa
2.5, Casting tank leakage rate: ≤ 100Pa. LS
2.6, Casting tank working vacuum: 100~300Pa
2.7, Casting tank working pressure: Ordinary pressure
2.8, Adopt electronic scale & high viscosity pump for material feeding
2.9, Adopt dynamic material mixing
2.10, Adopt vacuum casting technology
2.11, Adopt industrial computer controlling & manual controlling modes. Automatic
Record material tank, casting tank, mould temperature, vacuum degree. Preset material tank
Feeding rate.
2.12, Material mixing tanks adopt electrical heating, automatic temperature control.
Casting tank adopts electrical heating plate directly heating. Each heating system has rock wool
Insulation. Casting tank equipped with stainless steel plate shield. Mixing tank equipped with
Steel plate shield. Surface temperature of the insulation is not higher than room temperature by
20° C.

3. Main elements list
1 Vacuum pump SV-300B
ZJY-300
2
1
German Leybold
Shanghai Sunshine
2 Vacuum main air valve Dn50-Dn100 many SNJ
3 Valve Dn16-Dn50 many China Suzhou
4 Electronic scale 0-1ton 2 METTLER
5 Reducer 4KW 3 China Guangdong
6 Temperature controller AI series 6 Xiamen Yudian
7 Vacuum transducer ZDZ-52M 2 China Chengdu
8 PLC FX series 1 Mitsubishi
9 Solid-state relay   4 China Wuxi
10 Computer 19 inch 1 Lenovo
11 Heating plate
Heating tube
500W
5KW
108
6
Taiwan
China Wuxi
12 Main elements 24V-380V 1 Schneider
13 Seal 2410*20 1 China Suzhou
14 Temperature sensor PT-100 8 China Shanghai
15 Casting tank 2400*3000 1 China Suzhou
16 Material tank 300L 3 China Suzhou
17 Control cabinet 600*900*2000 1 China Suzhou
18 Pump DN-40 2 China Zhejiang
19 Material lifter DN-100 1 China Suzhou
Epoxy Resin Vacuum Casting Machine
Epoxy Resin Vacuum Casting MachineEpoxy Resin Vacuum Casting Machine 
 

What are Flow meters?
A Flow Meter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas.
Flow meters: Quality oval gear flowmeter, positive displacement flow meter, turbine flow meter, flow transducer or a flow sensor.
Low cost flow meters, high pressure flow meters, stainless steel flow meters, plastic flow meters, OEM flow meters, high viscosity flow meters, acid flow meters, alkali flow meters, hydraulic flow meters, oil flow meters, fuel flow meters, beer and water flow meters are all possible. With our chemically resistant, high accuracy digital flow meters with pulse outputs, we can handle almost anything. For hazardous areas some of these can be considered as simple apparatus.
Our process control and measuring instruments can monitor and/or display : total, batch size, flow rate, switch, consumption and 4-20mA or 10 volt analogue loops. The batching instruments can be used for dispensing, totaliser, accumulated totaliser, flow rate, dispense amount as well as full process monitoring.
The Oval gear, positive displacement and Turbine flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%. With over thirty years of experience in the production of flowmeters our team can offer either an of the shelf meter or fully bespoke flow products designe for a particular application whether it is a low cost OEM flow solution or a specialist flowmeter in exotic materials.
Installation Cautions for Flowmeters
In liquid service, be sure that the flowmeter is installed such that it remains full of liquid, because gas/vapor in the flowmeter can alter its geometry and adversely affect accuracy.
In gas/vapor service, be sure that the flowmeter is installed such that the flow meter remains full of gas/vapor, because liquid in the flowmeter can alter its geometry and adversely affect accuracy.
Disturbances located upstream of the flowmeter, such as pipe elbows and control valves, can adversely affect measurement accuracy, because the flow meter may not be able to accurately measure disturbed flow streams. Be sure to locate control valves downstream of the flowmeter so their flow disturbances are not introduced directly into the flowmeter. Also, be sure to properly design the upstream and downstream piping with sufficient straight run to remove disturbances that can affect measurement accuracy.
Be especially careful when flow is two-phase, such as liquid/gas flow and liquid/solid flow, because these flows can adversely affect the accuracy of many flow meters. Be careful because some flowmeters can become plugged and stop working in liquid/solid flow streams.
Application Cautions for Flowmeters
Each type of flowmeter has its own specific applications and installation constraints. There is no "one size fits all" flowmeter. The way to select the right flowmeter is to use the application as your guide, not the technology. Many of these technologies will all work well on many applications. If you start with the application, you can select the technology you wish to use based on accuracy, cost, durability and reliability, rather than trying to make the technology you chose fit the application you have.

Flow Meter

Mechanical Flow Meter, Pneumatic Check Valve, Turbine Water Meter, Liquid Flow Meter

Shanghai Jiasong Machine Co., Ltd , http://www.fuel-dispenser-parts.com

This entry was posted in on