Drive's motor parameter settings

Generally, before setting the control parameters, the inverter should set the motor parameters for motor self-tuning, which guarantees a better control effect. Motor parameters are rated voltage, rated frequency, rated current, rated speed and so on marked on the motor nameplate.

However, some inverter motors do not have these ratings on the rating plate, but some parameters that indicate the working range, such as the frequency of 2-120hz, the speed of 150rpm, etc., are not rated. In this way, when setting the inverter rated parameters of the motor, often make some users can not start, do not know how to set. If set incorrectly, the motor current is often large, even current limit, while the torque output is not satisfactory, the load can not be driven properly.

Inverter

First of all should be considered: control of unconventional motor, the inverter should be used V / F ratio of constant frequency control.

The correct setting method is:

Determine the number of motor poles;

According to the formula n (speed) = 60f (frequency) / P (number of pole pairs), the nameplate on the motor speed and pole pairs into the formula, calculate the value of f. That is converted to the highest speed corresponding to the frequency value;

The nameplate speed as the rated speed;

Will calculate the value of f slightly 1 ~ 2hz as the motor rated frequency;

Set the rated voltage, rated current and other nameplate data.


Lifting Chain Series

We can product Lifting Chain Series: G80 Lifting Chain, G100 Lifting Chain, DIN5687 lifting chain ,EN818-2 lifting chain
and some specicial Lifting Chain.

Product characteristics of high strength lifting chain:            

1. Material: High strength alloy steel.           

2. Surface treatment: rolling, blackening, galvanizing and so on.          

3. Production standard: ISO.DIN.BS.JIS.ASTM.           

 4. Level: G80, G100.            

5. Safety factor: minimum 4 times safety factor.           

 6. Product marking: G80, G100 or according to customer requirements.            

7. Non-standard chains can be produced according to customer requirements.

Lifting Chain

Lifting Chain Series

Lifting Chain, Hot Galvanzied Round Chain, Alloy Chain, Stud Link Anchor Chain, High Strength Chain, Round Link Chain

Hebei Fangyu Trade Co., Ltd. , http://www.filtersmaterial.com

This entry was posted in on