- Model NO.: BZC400BCA
- Condition: New
- Drill Hole Depth: >150m
- Drilling Way: Compound
- Drilling Depth(M): 400
- Single Rope Lifting Capacity of Windlas: 40
- Hydraulic Windlass Lifting Capacity: 40
- The Lifting Capacity of Hook(Kn): 250
- The Highest Speed(Km/H): 70
- Trademark: Kudat
- Specification: Pulling /thrust force: 40 T
- HS Code: 8430412900
- Certification: CE, ISO 9001:2000
- Drill Hole Diameter: >300mm
- Bit Type: Cone Bit
- Type: Crawler
- Drilling Diameter(mm): 500-2500
- The Capacity of Main Windlass(Kn): 240
- The Rope Capacity of Tool Windlass(M): 40
- Bearing Capacity (Kn): 250
- Weight(Kg): 19350
- Transport Package: Naked Packing
- Origin: China
Main features:
BZC400BCA truck mounted drilling rig is designed by our engineers.It is a kind of truck mounted and rotary drilling rig.
The truck chassis adopts the 8X4 special crane chassis of brand CHAN'AN TRUCK and the main drive system, the transfer case, gearbox, double-winch unit, mud pump, turntable,drilling tower, feed mechanism are set up on the chassis.
This rig is a rotary drilling rig with directional circulation. It is equipped with BW850/2A mud pump which adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulic system.
We can install the spare electric engine and clutch implement according to client's requirement, so that the rig can work with diesel engine or electric engine.
We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on the weathering formation.
The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled. Transfer case and mud pump clutch system are air operated.
 According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair, Japan PDSKIOOS,Sweden Atlas, China Kaishan,Hongwuhuang; can carry out air lifting reverse circulation drilling with air-water tap,double-wall drilling pipe,gas-water separator; can carry out Hydraulic DTH hammer drilling rock breaking with 850/2A mud pump; can carry out core-drilling with other special drilling tools.
The appearance of rig is pretty. It is high efficiency because of having a larger torque of the turntable and is mainly used for water well in industry and agriculture, national defense building foundation, geological exploration, geothermic well and other foundation working, it is popular at home and abroad. Â
Â
| Technical parameter | |||
| Â Drilling depth(M) | 400 | ||
| Â Drilling diameter(mm) | 500 | ||
| Â Speed of turntable(r/min) | 117; 102; 60; 38; 22; 13; 14(reverse) | ||
| Â Torque of turntable(KN.m) | 5.4------50 | ||
| Single rope lifting capacity of main windlass(KN) | 40 | ||
| Maximum lifting capacity of main windlass(KN) | 240 | ||
| Single rope lifting capacity of assistant windlass(KN) | 40 | ||
| Single rope lifting capacity of assitant windlass(KN) | 160 | ||
| Â The lifting capacity of hook(KN) | 250 | ||
| Â Bearing capacity of drilling tower (KN) | 250 | ||
| Â The height of drilling tower (mm) | 12503 | ||
| Drill pipe |  Kelly bar(mm) | 108×108×7500 | |
|  Assistant pipe (mm) | .Ф89×10×5700 | ||
|       BW850/2A plunger pump  |
 Diameter of cylinder (mm) | 150 | |
| Â Stroke of piston (mm) | 180 | ||
| Theoreical flow (L / min) | 600Â Â Â Â Â 850 | ||
| Rated pressure (Mpa) | 3Â Â Â Â Â Â Â Â 2 | ||
| Pounding  times (min-1) | 58       82 | ||
| Â Diameter of suction tube (mm) | 127 | ||
| Â Diameter of drain pipe (mm) | 64 | ||
| Â Input speed (r / min) | 470 | ||
| Â Input power (kw) | 40 | ||
| Â Overall dimensions (mm) | 2000*1030*1400 | ||
| Weight (t) | 1.5 | ||
| Â Â Â Truck chassis |
 Drive form | 8×4 | |
| Â Engine |
 Model | YC6A260-33YC water -cooled four strok diesel engine | |
| Â Rated power(KW) | 191 | ||
|  Speed (r/min) | 2300 | ||
|  Size (L*W*H)(mm) | 11510*2480*2800 | ||
| Electric generator | Model | MF | |
| Rated power (kw) | 15 | ||
| Rated voltage(v) | 400 | ||
| Rated current(A) | 27 | ||
| Speed (r/min) | 1500 | ||
| Frequency(Hz) | 50 | ||
| Protection level | IP21 | ||
| Insulation Class | H | ||
| Â The highest speed(Km/h) | 75 | ||
|  Weight (kg) | 19340 | ||
| Â Transport size(L*W*H)(mm) | 11981x2480x3870 | ||
| Â Working size(L*W*H)(mm) | 11145x2480x13289 | ||
Â
Most kinds of plastics could be processed by plastic pyrolysis machines.
the main plastics will be PP PE with high oil output
PVC or PET is not suitable for pyrolysis machines
there will be Cl generated from its process
when met with water, there will be HCL,
it is harmful to reactor and all the whole plastic pyrolysis system.
the main process is that by heating the reactor directly, plastics will be pyrolysised into oil gas;
condensers or cooling pipes will cool the gas down into liquid oil with the help of recycling water;
then the rest gas which could not be cooled down into liquid oil will be recycled into reactor heating system; after oil gas coming out completely, stop heating the reactor, and cool down reactor below 70 degrees; then can open the door and discharge carbon black automatically...
there are models with capacities from 5tons to 20tons per batch
LN-2200-6000 capacity of 5-6ton
LN-2200-6600 capacity of 7-8ton
LN-2200-8000 capacity of 9-10ton
LN-2600-6600 capacity of 10-12ton
LN-2600-8000 capacity of 12-14ton
LN-2800-6000 capacity of 10-12ton
LN-2800-6600 capacity of 12-14ton
LN-2800-8000 capacity of 15-20ton
if cut into smaller pieces, it could process more.
the whole process includes feeding plastics into pyrolysis reactor;
then heating the reactor and oil gas coming out for some time;
cool down the reactor; at last open the door and discharge the carbon blacks...
Waste Plastic Pyrolysis Machine
Waste Plastic Pyrolysis Machine,Plastic Pyrolysis Machine,Plastics Pyrolysis Equipment,Scrap Plastic Pyrolysis Machine
Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com