Advantages of daily use of triple screw pump

The three-screw pump in our usual models, generally include 3G universal type, 3GC marine type and special type, the working principle of the three-screw pump is to use the active screw and driven screw on the spiral groove intermesh and they and the bushing three holes The cooperation of the inner surface allows several stages of dynamic sealing chambers to be formed between the inlets of the pump. These dynamic sealing chambers will continuously move the liquid from the pump inlet to the pump outlet and cause the liquid to be stepped up. A continuous, smooth, axially moving pressure fluid is formed.

The three-screw pump has the advantages of simple structure, long life, small pulsation, stable flow and low noise in daily use.

1. Simple structure: with a variety of structural forms, the general small flow of 0.2-6.5m / h, triple screw pump pump body and the bushing into one (collectively referred to as the pump body) shaft seal for the end mechanical seal. The pump bushings with medium flow rate are fixed to the pump body as separate parts, and the large flow pumps are made into horizontal installations with double suction structure. The shaft seals have two kinds of end mechanical seals and packing seals according to the different transmission media.

2. Long life: The active screw of the three-screw pump is driven by the motor, there is no mechanical contact between the master and slave rods, and the three-screw pump is driven by the transmitted pressure fluid to rotate from the bobbin axis, between the master and slave rods, and the screw There is a layer of oil film protection between the bushings, so the mechanical friction of the pump is minimal and the service life is semi-permanent.

3. The liquid to be transported is axially and uniformly linearly moved in the pump, so the pressure pulsation is small, the flow rate is stable, and the noise is low. Because the inertia of the rotating part of the triple screw pump is small, the starting torque and vibration are very small.

Train a lot of accessories are made by investment casting, such as engine parts, transmission parts, clutch, transmission, universal transmission device, main reducer, differential and half shaft), brake system parts, steering system accessories (booster assembly, steering knuckle ball head, steering knuckle, steering wheel, steering rod, booster pump, steering, steering machine, etc.), and many of them are Carbon Steel Castings, high chromium steel castings, Alloy Steel Castings, need strong mechanical properties, to ensure the safety of the train


Casting is also closely related to daily life. For example, Train Parts Castings , auto parts castings, Truck Parts Castings, Forklift Parts Castings, pump valve castings and so on

our company can provide customers with a variety of shapes of product research and development, design, customization, and different material products

Railway Parts Castings


Train Parts Castings

Train Parts Castings,Train Parts investment Castings,Carbon Steel Train Castings,Train Parts Lost Wax Castings

Wei fang junlong precision casting Co.,Ltd , http://www.junlongcasting.com

This entry was posted in on