Working Mode:Cutting header conveyor roller and sawing plate harvest crops, and orderly delivery the crop stalk, leaf, and spike mixture into the feeding roller , the feeding roller clamping material into cutterheader and throw the chopped material.
Functions and Features:
1) Cutting header conveyor rolloer and saw plate can adapt all stem crops harvesting, do not need to on line.
2) Crops cutting length can be adjusted by changing the blade quantity.
3) The cast cylinder can rotate 360 degrees. This device can promptly and accurately load the chopped material into the accompanying carriages.
4) Walking system: it is the gear CVT walking system.
5) The crops height not lower than 1.4 meter.
6) Cutting stubble height:lower than 150mm.
7) Unique grain crushing and rubbing device can make further materials fragmentation and get the best domestic cutting and rubbing effect.
8) Oversize fuel tank: can contactly working for more than 22 hours. (Fuel tank capacity is about 400 liter)
9) Turning support: Can make the cast cylinder softly rotate.
10) Wheel disc chopper, it is actually upgrade on the basis of chaff cutter.
11) The moving blade quantity: 4pcs or 6 pcs or 9pcs.
12) The fan blade quantity is 12 pieces.
Main Technical Parameter:
Items | Parameters |
Operation way | Auto-run unlevel harvest |
Cutting table type | vertical cylinder |
Operation Range | 2400mm |
Operation speed | 4-8km/h |
Efficiency | 20-60T/h |
Cutting Length | 7-50mm(adjustable) |
Loss rate | ≤3% |
Min cutting height | ≤150 |
Engine Power | 140kw(190hp) |
Dimension | 7100*2850*4730mm |
Overall weight | 6900kg |
Applicaion: To be used for harvesting ripening period and full ripeness period of corn, sunflower, sorghum and vanilla and other high stalk crops.
Working Mode:Cutting header conveyor roller and sawing plate harvest crops, and orderly delivery the crop stalk, leaf, and spike mixture into the feeding roller , the feeding roller clamping material into cutterheader and throw the chopped material.
Functions and Features:
1) Cutting header conveyor rolloer and saw plate can adapt all stem crops harvesting, do not need to on line.
2) Crops cutting length can be adjusted by changing the blade quantity.
3) The cast cylinder can rotate 360 degrees. This device can promptly and accurately load the chopped material into the accompanying carriages.
4) Walking system: it is the gear CVT walking system.
5) The crops height not lower than 1.4 meter.
6) Cutting stubble height:lower than 150mm.
7) Unique grain crushing and rubbing device can make further materials fragmentation and get the best domestic cutting and rubbing effect.
8) Oversize fuel tank: can contactly working for more than 22 hours. (Fuel tank capacity is about 400 liter)
9) Turning support: Can make the cast cylinder softly rotate.
10) Wheel disc chopper, it is actually upgrade on the basis of chaff cutter.
11) The moving blade quantity: 4pcs or 6 pcs or 9pcs.
12) The fan blade quantity is 12 pieces.
Main Technical Parameter:
Items | Parameters |
Operation way | Auto-run unlevel harvest |
Cutting table type | vertical cylinder |
Operation Range | 2400mm |
Operation speed | 4-8km/h |
Efficiency | 20-60T/h |
Cutting Length | 7-50mm(adjustable) |
Loss rate | ≤3% |
Min cutting height | ≤150 |
Engine Power | 140kw(190hp) |
Dimension | 7100*2850*4730mm |
Overall weight | 6900kg |
Alumina ball is a high-quality grinding medium made of selected high grade material, advanced molding technology and calcined in high temperature tunnel kiln. Possessed with high density, high hardness, low wear, good seismic stability and good corrosion resistance, the products are the most ideal medium for grinding glaze, blank and mineral powder processing, and are used as the grinding medium of ball mill in ceramics, cement, paint, refractory, inorganic mineral powder and other industries.
Commodity |
Alumina ball 30mm |
Appearance |
Faint yellow |
Al2O3 Content (%) |
≥70%±2% |
Bulk Density |
3.02(g/cm3) |
Water absorption |
<0.01(%) |
Degree of hardness (MOhs) |
8 |
Use raw material |
Fining high bauxite |
Formation way |
Isostatic pressing |
Alumina Ball 30,92% Alumina Ball,High Quality Alumina Balls,High Alumina Grinding Bead Ceramic Balls
Shanxi Ruineng Ceramic Material Co.,Ltd , https://www.rnceramic.com