0.5HP/370W Vortex Pump (GP125) , Self-Priming Water Pump

GP series self-suction water pumps are new designed high efficiency house-hold electric pumps, with the motor and the pump mounted together. They are sealed with wear-resistant mechanical sealing, and carry the merits of easy to operate, light weight, high efficiency and relative low consumption of power. GP series pumps have self-sucking function, which makes it better used in places that pumping clean water, and request intermission kind of working, but without refilling the water from each restarting of the pumps.

Pumps should be installed in a covered area, protected against the weather.

Construction features
Pump Body: Cast Iron 
Motor Housing: aluminum
Shaft: 45# steel /stainless steel
Impeller: Brass
Motor: closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44/IP54
Duty: continuously rated
Mechanical Seal: ceramic steatite/ metalized carbon


Operating limitations
Liquid temperature up to 60
Ambient temperature up to 40ºC
Total suction lift up to 9m
Continuous duty





                    GP series self-suction water pumps are new designed high efficiency house-hold electric pumps, with the motor and the pump mounted together. They are sealed with wear-resistant mechanical sealing, and carry the merits of easy to operate, light weight, high efficiency and relative low consumption of power. GP series pumps have self-sucking function, which makes it better used in places that pumping clean water, and request intermission kind of working, but without refilling the water from each restarting of the pumps.

Pumps should be installed in a covered area, protected against the weather.

Construction features
Pump Body: Cast Iron 
Motor Housing: aluminum
Shaft: 45# steel /stainless steel
Impeller: Brass
Motor: closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44/IP54
Duty: continuously rated
Mechanical Seal: ceramic steatite/ metalized carbon


Operating limitations
Liquid temperature up to 60
Ambient temperature up to 40ºC
Total suction lift up to 9m
Continuous duty





                   

DZL series package boilers are horizontal three-pass water & fire tube boilers with a chain grate stoker structure. Threaded pyrotechnic tubes are arranged in the drum to form a convection heating surface, while the drum and the water walls on both sides form a radiation heating surface in the furnace. Each package system is fully installed and wired before being transported to site and is electrically controlled to provide functions such as stepless speed regulation for the stoker, threshold parameter alert and interlock protection.

DZL Steam Boiler

WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com